So is this the latest version of the Fuzz War? If so, I'll get a layout going today.bubstance wrote:Blammo.
Death by Audio - Fuzz War [traced]
- John Lyons
- Solder Soldier
After 14 years I finally built this!
I got lucky and it fired right up.
I swaped out the 2N5088s I had
in there and tried some higher
gain 2N5089s which did not work
as I just got a hard gated sound out.
I breadboarded the first stage
and measured the emitter (Output)
voltage. Non working transistors
measured .04v or so. Working
transistors were in the 3v to 4v
area at least on the transistors I
measured.
I got lucky and it fired right up.
I swaped out the 2N5088s I had
in there and tried some higher
gain 2N5089s which did not work
as I just got a hard gated sound out.
I breadboarded the first stage
and measured the emitter (Output)
voltage. Non working transistors
measured .04v or so. Working
transistors were in the 3v to 4v
area at least on the transistors I
measured.
- theehman
- Diode Debunker
Information
So where's the final version of the schematic?
Ron Neely II
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
Electro-Harmonix info: http://electroharmonix.vintageusaguitars.com
Home of RonSound effects: http://www.ronsound.com
fx schematics and repairs
- John Lyons
- Solder Soldier