Digital reverb engine AL3201

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
KMG
Solder Soldier
Information
Posts: 209
Joined: 02 Feb 2010, 20:26
Location: Russia
Has thanked: 5 times
Been thanked: 80 times
Contact:

Post by KMG »

Plug in module
Image Image
Schematics (pdf)
Image
Ready to transfer PCB (pdf)
Image
Upper side assembly (pdf)
Image
Bottom side assembly (pdf)
Image
Minimal connections
Image
Board with input and output levels adjusting ±15 dB and dry/effect mix
Image Image
Schematics (pdf)
Image
Ready to transfer PCB (pdf)
Image
Upper side assembly (pdf)
Image
Bottom side assembly (pdf)
Image
In case (not finished yet - no markings) with UV meter and digital effect selector
Image
To the digital connector it is possible to connect micro-controller for loading your own programs in DSP.
Example of program for ATMEGA128, compatible with Wavefront DRE Development System.
http://milas.spb.ru/~kmg/files/projects/dre/avr/
Example delay with digital feedback (5 DSP commands)
Maximum possible delay (mono) 30% feedback
http://milas.spb.ru/~kmg/files/projects ... /1/03M.mp3
Intermediate delay 50% feedback
http://milas.spb.ru/~kmg/files/projects ... s/1/05.mp3
Intermediate delay 70% feedback
http://milas.spb.ru/~kmg/files/projects ... s/1/07.mp3
Intermediate delay 90% feedback
http://milas.spb.ru/~kmg/files/projects ... s/1/09.mp3
Project page
http://milas.spb.ru/~kmg/dre_en.html
Image

User avatar
bajaman
Old Solderhand
Information
Posts: 4544
Joined: 26 Jun 2007, 21:18
Location: New Brighton, Christchurch, NZ
Has thanked: 593 times
Been thanked: 2049 times

Post by bajaman »

:shock:
:applause:
very nice Mike - thanks for sharing here :hug:
bajaman
be kind to all animals - especially human beings

User avatar
KMG
Solder Soldier
Information
Posts: 209
Joined: 02 Feb 2010, 20:26
Location: Russia
Has thanked: 5 times
Been thanked: 80 times
Contact:

Post by KMG »

Link to manufacturer site Wavefront Semiconductor. Datasheet, software examples. development system.
http://www.wavefrontsemi.com/index.php?products
Analog: COOLAUDIO CV1000
http://www.coolaudio.com/products.html
China clone
http://www.bdnc.com/datasheet/bd3201-14A_spec_V1.6.pdf
Image

User avatar
Greenmachine
Cap Cooler
Information
Posts: 616
Joined: 31 Aug 2008, 17:59
my favorite amplifier: Fender Blackface Deluxe Reverb
Completed builds: Electra Distortion
Roger Mayer Octavia
Klon Centaur (Bajaman/Soulsonic)
DOD 440 Envelope Filter
MXR Phase 90
DOD FET Preamp
Dallas Arbiter Fuzz Face
Soulsonic Hunny Bunny Overdrive
BYOC Analog Delay
Craig Anderton Headphone Amp
Anderton Mini Amp
Bajaman Real Tube Overdrive
Fender Deluxe 5E3 with Tone Stack Mod.
Fender Princeton 5F2-a
Keen Neovibe
Aquapuss Delay
Anderton AMS-100 Guitar Synth (abandoned)
DOD 280 Compressor
Weird Sound Generator
Beavis Audio Noisy Cricket
80's Rat
ROG Thor
Big Muff
Green Ringer
Shin-Ei Fuzz
MXR Dynacomp
COT50
Really Cheap Compressor
Location: Jersey City, NJ
Has thanked: 87 times
Been thanked: 17 times
Contact:

Post by Greenmachine »

You are like Zorro, or Batman or something.

When I read your project files I feel like I'm eating dinner at the kiddie table wondering what the adults are talking about.

Yeesh.
"[Y]ou want sketchy, dude? I breadboard on a door." -- RnFR, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011

User avatar
KMG
Solder Soldier
Information
Posts: 209
Joined: 02 Feb 2010, 20:26
Location: Russia
Has thanked: 5 times
Been thanked: 80 times
Contact:

Post by KMG »

As the experiment I tried to make the imitation of analog delay.
ATMEGA measures the position of potentiometers (through ADC) and dynamically changes DSP program: delay factor and feedback depth.
This chip allows to load from 1 instruction to whole program buffer. So for this imitation I have to modify only two instructions (this takes very short time). Full illusion of analog delay.
Image

User avatar
JiM
Diode Debunker
Information
Posts: 967
Joined: 11 Mar 2008, 22:56
Completed builds: Completed builds :
Proco Rat
MXR MicroAmp in a volume pedal
TubeDriver (w/ NoS russian tube and big muff tone contol) + Phase 45 (w/ univibe cap ratio)
Dallas Rangemaster (w/ noisy OC75, negative ground)
SubCaster tube booster (w/ NoS russian tube, PtP)
Hot Harmonics
Music From Outer Space SubCommander in progress
Crackle Not OK
Simple bass blender in a 1590A
Bazz Fuss with a photo-darlington
Location: France
Has thanked: 70 times
Been thanked: 66 times
Contact:

Post by JiM »

The CoolAudio V1000 (copy of the AL3201), an audio codec and an Atmel microcontroller are available for cheap in most digital Behringer pedals : DD-600, DR-600, FX-100, etc. (not the "machine" ones, they use a bigger DSP).

The easiest mod would be to disconnect the controller, and use 4 switches to select one of the 16 presets. The more complicated mod would involve custom programming of the DSP, thru custom programming of the controller.

I still have to dump the I²C messages between the controller and the DSP on my DD-600, before trying to re-program them ...
but i've been playing more with my guitar than my soldering iron lately :oops:
I only give negative feedback.

User avatar
KMG
Solder Soldier
Information
Posts: 209
Joined: 02 Feb 2010, 20:26
Location: Russia
Has thanked: 5 times
Been thanked: 80 times
Contact:

Post by KMG »

Unfortunately the protocol of the exchange there not I²C but its unique, read datasheet carefully.
There is source of exchange protocol with AL3201/V1000
http://milas.spb.ru/~kmg/files/projects/dre/avr/Dre.c
Image

User avatar
JiM
Diode Debunker
Information
Posts: 967
Joined: 11 Mar 2008, 22:56
Completed builds: Completed builds :
Proco Rat
MXR MicroAmp in a volume pedal
TubeDriver (w/ NoS russian tube and big muff tone contol) + Phase 45 (w/ univibe cap ratio)
Dallas Rangemaster (w/ noisy OC75, negative ground)
SubCaster tube booster (w/ NoS russian tube, PtP)
Hot Harmonics
Music From Outer Space SubCommander in progress
Crackle Not OK
Simple bass blender in a 1590A
Bazz Fuss with a photo-darlington
Location: France
Has thanked: 70 times
Been thanked: 66 times
Contact:

Post by JiM »

Ooops, maybe that's why i had problems with the I²C sniffing ... :slap:
must. read. datasheet. carefully.

And thanks for the source code ! :hug:
I'll port that on Arduino when i find some time.
I only give negative feedback.

User avatar
iorobyy
Information
Posts: 1
Joined: 09 Jul 2010, 09:12

Post by iorobyy »

hello guys! :D
I'm new in this forum.
i need a project using v1000 chip ...i've found this project but now the links seems not working. :cry:
Could anyone help me to recover all the files / informations.
Thnkkks

User avatar
rocklander
Old Solderhand
Information
Posts: 2726
Joined: 18 Apr 2008, 11:33
my favorite amplifier: my jansen bassman 50
Completed builds: rebote 2.5; supreaux; odie; heartthrob tremolo; ross phaser; dr. boogey; thor; baja black toast; slow gear attack, rebote, tri-vibe, small clone, little angel, magnus modulus, echo base, hex fuzz, big muff, 22/7.
Location: Rotorua, New Zealand
Has thanked: 1406 times
Been thanked: 231 times
Contact:

Post by rocklander »

shame the links have gone astray.. I'd be interested in seeing more applications of the v1000 chip... any reason it appears to be passed over?
world's greatest tautologist ...in the world
Ronsonic wrote:...the lower the stakes the more vicious the combat.

User avatar
KMG
Solder Soldier
Information
Posts: 209
Joined: 02 Feb 2010, 20:26
Location: Russia
Has thanked: 5 times
Been thanked: 80 times
Contact:

Post by KMG »

Wait several days, process of moving domain name to new IP address.
Immediately you can get information by changing domain name in links to IP address.
http://217.119.30.118/~kmg/
Image

User avatar
Dirk_Hendrik
Old Solderhand
Information
Posts: 4189
Joined: 03 Jul 2007, 08:44
Location: Old Amsterdam
Has thanked: 232 times
Been thanked: 886 times
Contact:

Post by Dirk_Hendrik »

Never seen this thread before. Even without those file I think KMG is going to be on my cool list for the next couple of weeks. 8)
Sorry. Plain out of planes.

http://www.dirk-hendrik.com

User avatar
andre
Breadboard Brother
Information
Posts: 51
Joined: 21 Jan 2008, 15:20
my favorite amplifier: Hughes & Kettner Statesman Quad
Completed builds: Dist + overdr.: Distortion+, BSIABII, Shaka III, Bluesbreaker, Box of Rock, Highway 89, DS-1, Proce Rat, Omnidrive, TS808, Bluemagic, Fulldrive 2, big muff
Delay: DM-2, Rebote 2.5, PT-80
Modulation: Ross Phaser, Small Clone, CE-2, Zombie chorus, FL-301, Easyvibe, Ultraflanger
Compr.: Dod280, Dynacomp
the rest: SG-1, Sparkleboost, BAJA CX-3 leslie simulator
Location: Netherlands
Been thanked: 6 times

Post by andre »

FYI here's a little demonstration of my Femtoverb, a AL3201 based circuit, for which I build a controller with an LCD display and some buttons.
The demo shows all of the factory presets.



There is some reverb audible even in the non reverb presets because I forgot to turn of my amps reverb, but still the demo will give a good impression of the AL3201's presets

User avatar
Dirk_Hendrik
Old Solderhand
Information
Posts: 4189
Joined: 03 Jul 2007, 08:44
Location: Old Amsterdam
Has thanked: 232 times
Been thanked: 886 times
Contact:

Post by Dirk_Hendrik »

Nice one!!
Sorry. Plain out of planes.

http://www.dirk-hendrik.com

User avatar
nissan62
Information
Posts: 3
Joined: 19 Jan 2022, 05:34

Post by nissan62 »

Добрый день друзья. У меня испортился микшер behringer xenyx 1002fx. Испортился ATmega8 который загружает пресеты в процессор V1000. (AL3201)!!!! Где можно найти прошивку для ATmega8? Может чем то сможете помочь? Image

User avatar
MerlynMetal
Information
Posts: 27
Joined: 03 Sep 2009, 09:30
Has thanked: 1 time
Been thanked: 4 times

Post by MerlynMetal »

I was looking how to replace the internal AL3201 programs and came upon this thread. So my question is are there any free FX files available for this chip (interested mostly in delays) and a guide how to load them into the chip?

Post Reply