Build your favorite Big Muff

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
soggybag
Resistor Ronker
Information
Posts: 252
Joined: 07 Aug 2007, 23:29
Completed builds: Fuzz Face, Tone Bender, Big Muff, ICBM, Ugly Face, Green Ringer, Super Fuzz, Multiplex Echo, Multiplex Jr, Rebote, Echo Base, SHO, Fuzz Factory, Titan Boost/Octave, Easy Face, Tone Bender MkII, Trem Shifter, Zero Point Mini...
Location: San Francisco
Has thanked: 22 times
Been thanked: 15 times
Contact:

Post by soggybag »

Here’s a PCB I made that uses the part numbers from the Big Muff Page. Find a schematic there and populate this board!

http://www.super-freq.com/pcb-projects/ ... -big-muff/

http://www.bigmuffpage.com/Big_Muff_Pi_ ... part1.html

Here is an Elk Electrosound I did.

http://www.super-freq.com/watas-electro-sound-big-muff/
38FF0F4D-0D89-43CA-9658-8BBB38FD5866.jpeg
38FF0F4D-0D89-43CA-9658-8BBB38FD5866.jpeg (109 KiB) Viewed 316 times
7CC55625-2FE1-4487-AF41-0EDDB66802E9.jpeg
7CC55625-2FE1-4487-AF41-0EDDB66802E9.jpeg (126.69 KiB) Viewed 316 times
00C23CAB-21FB-4B80-8C83-E21F43CFF264.jpeg
00C23CAB-21FB-4B80-8C83-E21F43CFF264.jpeg (112.39 KiB) Viewed 316 times

Post Reply