Pédale de Vibrato et de Super-Aigues

Free online ressources on guitars, amps, effects, guitar technique and more. Dedicated to the fond memory of its founder SPeter Davidoff.
Post Reply
User avatar
Rambozo96
Breadboard Brother
Information
Posts: 50
Joined: 07 Oct 2018, 23:01
Completed builds: Superfuzz’s, Mosrite Fuzzrite, various Tonebenders, some oddball Russian stuff, MXR Distortion II, modded various DOD pedals to true bypass, opamp Big Muff.
Has thanked: 10 times
Been thanked: 39 times

Post by Rambozo96 »

Hello all I have stumbled upon a schematic with a treble booster and a tremolo effect from a French DIY magazine. What strikes me as very odd is how the aforementioned treble booster uses 2 transistors. They kinda look like 2 identical gain stages running in series. I got the circuit built on PCB and ready for final assembly since curiosity got the better of me. A schematic is provided for those also curious about this or anyone that can shed light on how this circuit works as a treble booster.
Attachments
Schematic
Schematic

User avatar
idy
Breadboard Brother
Information
Posts: 122
Joined: 14 Dec 2011, 04:41
Completed builds: FFs, Octavias, TBMKIIIs, Buzzarounds/alikes, Axis Fuzz', CS Overdriver, BMPs, Black '65s, MOSFETODs, WiiO, RAH, Klons, AC30, DLS, TSs and many variants, Small Clones, UniVibes, E. Mistress, Mutron Env Filter, Ross/Dynacomps,, EA Trems, TremLunes, Katana Boosters, BYOC Tri Boosters, other boosters and buffers, PT2399 delays, SKRM based delays, Belton Brick Reverbs, 3band parametric EQ,
Location: Idyllwild, CA
Has thanked: 27 times
Been thanked: 29 times

Post by idy »

The first transistor is a booster. Then there is a "T" filter that cuts bass. The second transistor is a gain recovery stage. So your signal is super hot and super aigue.

User avatar
modman
a d m i n
Information
Posts: 4764
Joined: 19 Jun 2007, 16:57
Has thanked: 4204 times
Been thanked: 1853 times

Post by modman »

Posting this partial page from the French electronics magazine Le Haut-Parleur on Facebook turned up the missing page.
Attachments
79981986_841025619664307_5810258477020348416_o.jpg
79360647_841024959664373_3155259597581713408_o.jpg
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
Rambozo96
Breadboard Brother
Information
Posts: 50
Joined: 07 Oct 2018, 23:01
Completed builds: Superfuzz’s, Mosrite Fuzzrite, various Tonebenders, some oddball Russian stuff, MXR Distortion II, modded various DOD pedals to true bypass, opamp Big Muff.
Has thanked: 10 times
Been thanked: 39 times

Post by Rambozo96 »

I finally got around to building this, used MP11A NPN Russian germanium so I don’t need a charge pump for the circuit. It’s very thin sounding and almost unusable with how much high end it pumps out. Maybe the T filter can be tweaked to tame the ice pick highs? Probably doesn’t help that I used a Danelectro in the demo.


User avatar
modman
a d m i n
Information
Posts: 4764
Joined: 19 Jun 2007, 16:57
Has thanked: 4204 times
Been thanked: 1853 times

Post by modman »

Thanks for that clip - I don't think anybody has an excuse for demo clips anymore :D
Did you build this part of the circuit or the whole thing?
Screen Shot 2019-12-20 at 13.19.17.png
It may be the transistors, if not start jumpering the filtering between the two transistors. Dropping first 1n5 and the 10k resistor...
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
Rambozo96
Breadboard Brother
Information
Posts: 50
Joined: 07 Oct 2018, 23:01
Completed builds: Superfuzz’s, Mosrite Fuzzrite, various Tonebenders, some oddball Russian stuff, MXR Distortion II, modded various DOD pedals to true bypass, opamp Big Muff.
Has thanked: 10 times
Been thanked: 39 times

Post by Rambozo96 »

Just the treble booster side. I attempted the whole thing last year and couldn’t get either to work BUT my laying out schematics to PCB skilled were fairly weak then. I guess I’ll try different transistors first and see what happens from there.

User avatar
mictester
Old Solderhand
Information
Posts: 2896
Joined: 11 Sep 2008, 20:29
my favorite amplifier: Mesa Boogie, Roost Sessionmaster, AC30
Completed builds: Hundreds! Mostly originals, a few clones and lots of modifications.
Location: Somewhat closer to Amsterdam than before!
Has thanked: 27 times
Been thanked: 798 times
Contact:

Post by mictester »

It's NOT a vibrato - it's a badly designed germanium TREMOLO. It might (sort of) work, but there are LOTS of better circuits around to do this. The treble booster is also poorly designed and will have more hiss than signal!
"Why is it humming?" "Because it doesn't know the words!"

User avatar
BMS1971
Breadboard Brother
Information
Posts: 76
Joined: 31 May 2020, 14:18
Has thanked: 18 times
Been thanked: 25 times

Post by BMS1971 »

modman wrote: 20 Dec 2019, 12:25 Thanks for that clip - I don't think anybody has an excuse for demo clips anymore :D
Did you build this part of the circuit or the whole thing?
Screen Shot 2019-12-20 at 13.19.17.png
It may be the transistors, if not start jumpering the filtering between the two transistors. Dropping first 1n5 and the 10k resistor...
I made it, sound week, BUt with a little change it's a great overdrive ;-)
Benoit

Post Reply