BROS Distortion traced Schematic
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
I recently bougt this defective BROS Distortion pedal and traced it.
The BROS Distortion is almost the same as the Soundcity DS-04 Distortion.
There are two differences the resistor R1 has a value of 4.7 kiloohms instead of 2.7 kiloohms on the Soundcity pedal,
the DIST potentiometer (R8) has a value of A50K instead of B100K on the Soundcity pedal.
Here the link to the post of the Soundcity DS-04.
viewtopic.php?p=279614&hilit=soundcity#p279614
The BROS Distortion is almost the same as the Soundcity DS-04 Distortion.
There are two differences the resistor R1 has a value of 4.7 kiloohms instead of 2.7 kiloohms on the Soundcity pedal,
the DIST potentiometer (R8) has a value of A50K instead of B100K on the Soundcity pedal.
Here the link to the post of the Soundcity DS-04.
viewtopic.php?p=279614&hilit=soundcity#p279614
- mauman
- Resistor Ronker
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
Yes, it is the same PCB.
- Manfred
- Tube Twister
Information
- Posts: 1945
- Joined: 04 Apr 2009, 23:42
- Has thanked: 1675 times
- Been thanked: 1360 times
I corrected the Schematic, the value of the DIST Pot is C50k not A50k.
I wrote:
I corrected the Schematic in the soundcity post.
I wrote:
That is wrong, the value at the Soundcity pedal is also C50K.the DIST potentiometer (R8) has a value of A50K instead of B100K on the Soundcity pedal.
I corrected the Schematic in the soundcity post.