Energy Drink

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
CheapPedalCollector
Resistor Ronker
Information
Posts: 399
Joined: 19 Oct 2020, 15:15
Has thanked: 452 times
Been thanked: 149 times

Post by CheapPedalCollector »

I've been inspired to create more stuff in the vein of EHX, this is my take on the LPB-1 circuit. It has a bit of bass roll-off to be less muddy with humbuckers but still be beefy enough for a tele or strat. It's an amp driver first and foremost with just slight coloration. I added an extra switch to add some compression with some current feedback, and a gain control to give some extra boost/dirt. I chose BC107B as they are still readily available, but you can also use 2n5133 for more EHX mojo, which is available from Small Bear sometimes.

Hope you like it.
EnergyDrink.png
EnergyDrink.png (4.03 KiB) Viewed 736 times

Post Reply