Alembic F1x schematic

Tube or solid-state, this section goes to eleven!
Post Reply
User avatar
Jarno
Resistor Ronker
Information
Posts: 356
Joined: 12 Nov 2008, 10:18
my favorite amplifier: Something nice
Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D
Location: Rosmalen, NL
Has thanked: 27 times
Been thanked: 79 times

Post by Jarno »

The schematic for the other bass preamp by Alembic, the F2b, can be found quite easily on the net, but I hadn't earlier seen the schematic for the F1x.
The product blurb mentioned something that to me pointed to integrated filter IC's like the UAF42 (although that is reported to sound "not great"), but apparently not :)
Alembic F1x schematic.png
"It crackles....., but that's ok"

Post Reply