Ibanez EM5 Echomachine Re-House

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.
Post Reply
User avatar
stilwel
Information
Posts: 14
Joined: 07 Nov 2014, 20:21
Has thanked: 1 time
Been thanked: 1 time

Post by stilwel »

Finally got this thing done this afternoon.

It's a fair amount of work to get this PCB to fit into a 125B enclosure. The PCB had to be shaved down with a belt sander.

Image

Image

User avatar
stilwel
Information
Posts: 14
Joined: 07 Nov 2014, 20:21
Has thanked: 1 time
Been thanked: 1 time

Post by stilwel »

Final pic. I had to drill out the knobs with a 1/4" bit to get them to fit onto the pot shafts.

Image

User avatar
andregarcia57
Cap Cooler
Information
Posts: 570
Joined: 16 Nov 2008, 15:42
Has thanked: 69 times
Been thanked: 107 times

Post by andregarcia57 »

Hi guys, where can I find the ferrite bead? Is it a specific model? thanks
Attachments
ferrite bead.png

User avatar
mauman
Resistor Ronker
Information
Posts: 411
Joined: 17 Jun 2017, 20:01
Location: Texas, US
Has thanked: 410 times
Been thanked: 179 times

Post by mauman »

The specific part doesn't matter much, all ferrite beads work pretty much the same as RF filters when combined with those caps C1 and C2 in the schematic. Something like this would work: https://www.mouser.com/ProductDetail/KE ... A1sg%3D%3D

Post Reply