1997 Laney LC15R - dissected and (almost) ready to build

Tube or solid-state, this section goes to eleven!
User avatar
picturevalve
Information
Posts: 5
Joined: 23 Jan 2014, 12:53

Post by picturevalve »

Two pots is problematical due to limitations of space. If you look at the two schematics you will see that the Vr1b is wired differently in each case, hence the different taper. One is log(a) one is antilog(c).

User avatar
andomando
Information
Posts: 2
Joined: 08 Jun 2011, 09:09

Post by andomando »

I know this was some years ago but i have looked at the schematic and was wondering what voltage caps c21 and c22 47uf are. regards for any answers.

User avatar
lolbou
Old Solderhand
Information
Posts: 2619
Joined: 18 Nov 2008, 21:38
Has thanked: 308 times
Been thanked: 227 times

Post by lolbou »

andomando wrote: 09 Jun 2024, 17:16what voltage caps c21 and c22 47uf are. regards for any answers.
These are 50V caps. :wink:
- Are you a mod or a rocker?
- Uh, no, I'm a mocker.

Post Reply