Joyo vintage overdrive

Mikante · Post by **Mikante** » 13 Feb 2025, 21:02

Guys, help me,
I got this pedal dismounted who knows why, i did that long ago.
I remember to like this effect, so i want it to try it one more time.
The pcb board is ok but there is no 3dpt switch connected to the main board, i now have this six pins which i have no idea how to connect. I just want it to hear it again and if i likex it, i will buy a new 3dpt switch and install it.

As you can see i have already tried to make it work and understand how the six pins are connected but i had no luck.

karul · Post by **karul** » 13 Feb 2025, 22:00

Maybe this will help you.
viewtopic.php?p=152924#p152924

Mikante · Post by **Mikante** » 13 Feb 2025, 22:40

Thank you, i checked that post already, still can not get it to work. The 3dpt little board in the picture is not all clear.

karul · Post by **karul** » 13 Feb 2025, 23:40

Post pictures of your switch pcb, both sides.

Mikante · Post by **Mikante** » 13 Feb 2025, 23:55

I thought it was obvious, i don t have it

Lani · Post by **Lani** » 14 Feb 2025, 10:22

So the jack with the six pins (stereo jack) on the right is the input jack. So there must be a trace on the back side going to one of those six pins. Then the one on the left is the output jack and do the same with that one. The pad all the way to the right is GND. Without pics of the back side there isn't much we can do for you so try and get some pics of the back side of the board and then someone here can help you out. You can't take a pic with your phone?

Mikante · Post by **Mikante** » 14 Feb 2025, 14:59

I found the switch little board in a box, i have connected it and manage to do it wrong the first time, i had 50 50 chances i know, i flipped the wires and now it works. If anybody needs to know i can provide a picture. Thank you guys.

mauman · Post by **mauman** » 14 Feb 2025, 15:31

Yes, please post a pic, which may help others in the future! Thanks.