freestompboxes.org

Hi friends,
I have some components here.
Trading is preferred, as I am not really posting here for personal profit.
It's the spirit of DIY

You may or may not have a need / use for these, but these are what I have at the moment.
I will continuously update this topic if / when I have additional components.
Pictures are attached... All cap values are based on markings on the caps. Please correct me if I am wrong.

1. National Semicon LM317AT


2. 10uF 16V


3. 0.47uF 35V


4. 100uF 20V


5. 68pF 16V


6. 120pF


7. 0.1uF


8. Metal film resistor (Vishay) 392 ohms



9. Metal film resistor (Vishay) 243 ohms


Thanks for looking!
Please PM / post here to discuss Thanks again...

By the way, if any of you need SMD components (resistors & caps)... do let me know.
I have access for most commonly sought after values

And what do I want to trade these with?
15uF caps & reverse log pots
Qty & other details, we can discuss later on... thanks!!

Europe located ??

I LOVE .1uf Tants

yes, where are you located?

DahakaNishoba wrote:Europe located ??

I LOVE .1uf Tants

FYI

Those .1's aren't tants. They're multi (MLCC) ceramics - teeny tiny ceramic caps.

Dan

danielzink wrote:

DahakaNishoba wrote:Europe located ??

I LOVE .1uf Tants

FYI

Those .1's aren't tants. They're multi (MLCC) ceramics - teeny tiny ceramic caps.

Dan

hmhmhm
maybe I got persuaded by the colour.....never used yellow ceramics
i'd love more tantalum caps anyway.....used 1, .47 and .1 so far.... i'd love to use em even lower but boh never found lower than 0.1

Hi guys, thanks for your replies.
I'm from Malaysia. But please don't let that fact put you down. Hahaha...

Daniel, thanks for the heads up!! I didn't know, I thought they were tantalums.
I posted actual pictures of the caps, just in case I got the values wrong, but in this case I even got the cap type wrong! Haha...

Like I mentioned earlier, I've no intentions on profit.
Just looking to trade for a win-win situation...
And, I've got loads of SMD resistors & caps, if you're really interested just drop me a PM or post here...