Page 1 of 1
Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 08:57
by mcaviel
Hi there here's some gut shots of my goatkeepers.
Version 2 has the same chip but it's under th pcb so i couldn't take a picture of it.
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 09:43
by SPeter
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 10:53
by Hides-His-Eyes
I was expecting one of those Molten Voltage chips.
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 13:21
by okgb
It's a compressor + ?
quality looks good , nice boardwork & components
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 15:18
by HEAD
okgb wrote:It's a compressor + ?
quality looks good , nice boardwork & components
No, it's a tap tempo controlled tremolo - just have a second look on it.
I guess you'll gonna do that after a second glimps:
Cheers
Helge
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 15:23
by okgb
Only if i enlarge the [ not bad ] photo
seeing the that chip vca ?
anyway still looks good
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 15:37
by Sweetalk
Very nice!. I assume that the THAT2180 it's a VCA. Can you take pictures of the other side of the board?
Re: Lighfoot Labs - Goatkeeper (V.2 V.3)
Posted: 04 Aug 2010, 18:04
by Whoismarykelly
The whole pedal revolves around the programming of the microcontroller. Everything else you see is just the analog audio path and the infrastructure to all the pots and jacks from the microcontroller.
