[FS] SAD1024A 2pcs and MN3007's 10pcs and MORE

sinner · Post by **sinner** » 16 Aug 2010, 10:10

Up for sell is 2pcs of SAD1024A's and 10pcs of MN3007's. I can add the EHX EchoFlanger board to Reticon order as a bonus if the buyer want to

SAD1024A's is $90, $50 for all 10pcs of MN3007's shipped to European countries. Shipping to US/Canada/Australia is not a problem, but please note that every time when I'm shipping to those countries delivery time is 2 long fucking months!!! No matter what shipping method I'm using, it's always like that

So European taker is preferred - less stress for me

I'm located in Toruń (central Poland), pick up is possible

No trade this time guys, I have to collect enough money to dry the source of OC140's I've just located

More items late, I'll check with what else I can part off

Cheers
Pawel

Dirk_Hendrik · Post by **Dirk_Hendrik** » 16 Aug 2010, 10:31

That's $90 for one or for 2 SAD's? And, are they tested?

sinner · Post by **sinner** » 16 Aug 2010, 10:34

for two SAD's not tested, but if you get those and the'll fail, I'll refund your money. I have no way to test them, sorry

MN3007's are tested. I may have 3pcs of MN3005's to up for sell, and they are tested to, depends of the guy I just PM'd, he was the first one who asked for them....

Dirk_Hendrik · Post by **Dirk_Hendrik** » 16 Aug 2010, 17:09

sinner wrote:for two SAD's not tested, but if you get those and the'll fail, I'll refund your money. I have no way to test them, sorry

No problems here

What I mean as well with the tested question is that you automatically assume responsibility for the functioning and will refund if failing. Then my question is how your, assumed functioning, SAD's are treated at the buyers side. Your buyer may have 0 electronics knowledge, recieve them, take them out of their ESD packaging (hint

, plug them in his/hers untested application, find it to fail, blame the SAD (because it is the component with the most pins) take em out again... swap them, etc etc.

SAD's are extremely sensitive to static electricity. As long as you are not aware of the conditions in which your buyer will treat them there's no reason for you to accept full responsibility for their funtioning.

And the same story goes for MN's.

sinner · Post by **sinner** » 16 Aug 2010, 17:22

Well, I like to be a fair with the people, from my point of view this is what it should looks like

For some guys dealing with polish guy is risky, I'm not afford to fuck up. $90 wouldn't break me, but bad opinion will do, and probably did already because of mailing service I have to use when shipping out of the continent...

...oh well...

Cheers any way

sinner · Post by **sinner** » 16 Aug 2010, 20:22

Ok, it looks like I have just accidentally added 80's EchoFlanger to my EHX collection. I'll be able to test those reticons. E/F should be here in about week of time

telecaster · Post by **telecaster** » 16 Aug 2010, 22:01

If the mn3005 sale falls through, pm me. I'm interested, thanks.

sinner · Post by **sinner** » 17 Aug 2010, 22:33

PM'd

BUMP

sinner · Post by **sinner** » 17 Aug 2010, 23:00

ok, 4 MN3005's up for sell $40 for one + shipping

TESTED!

sinner · Post by **sinner** » 18 Aug 2010, 19:38

Dude! MN3005's!!! When last time you've seen those tested?

sinner · Post by **sinner** » 18 Aug 2010, 22:03

SAD1024A's gone!

Still have all 10 MN3007's and 4 (possibly 6 if Scruffie will pass) MN3005's

phibes · Post by **phibes** » 19 Aug 2010, 06:09

You got mail Paco.

sinner · Post by **sinner** » 19 Aug 2010, 10:59

I know Timmy, mailed back, but you're in arms of sleep i think

sinner · Post by **sinner** » 20 Aug 2010, 06:34

sinner · Post by **sinner** » 21 Aug 2010, 15:19

on more mn3005 left