Page 1 of 1
9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 21 Aug 2010, 15:36
by VonRutter
I am looking for a 9-10mm, right-angle PCB mounted potentiometer that has a plastic shaft with a white marking on top. I've seen these used before, but I have yet to find a source for them. Below is a picture of the MI Audio Blue Boy Deluxe overdrive, which uses 4 of these potentiometers.
Any suggestions would be greatly appreciated. Thanks!
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 15 Sep 2010, 14:55
by VonRutter
*bump*
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 15 Sep 2010, 15:03
by Hides-His-Eyes
I'd like some of these too, but I don't think I'd be able to use them without PCBs made especially for the purpose.
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 30 Sep 2010, 21:07
by ckyvick
There's these trimmers with knobs:
http://www.forrestwhitesides.com/shop/p ... cts_id=162
Mouser might have something but youd have to search
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 30 Sep 2010, 21:24
by coi2001
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 01 Oct 2010, 17:33
by Scruffie
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 31 Jan 2011, 17:29
by VonRutter
These are the exact pots I already use, and there is no white marking on them. I've done a mouser search, and I've come up empty every time. Thanks for trying to help, but I don't think any of these pots will work.
Re: 9-10mm, right-angle PCB mounted pot w/ white marking
Posted: 31 Jan 2011, 17:35
by Scruffie
VonRutter wrote:
These are the exact pots I already use, and there is no white marking on them. I've done a mouser search, and I've come up empty every time. Thanks for trying to help, but I don't think any of these pots will work.
Ahh damn, the image lied...
Tippex?