Looking for a few parts.......

mikemaddux · Post by **mikemaddux** » 22 Sep 2010, 04:07

looking for:

1 - 25k Linear Pot
3 - MAX1044/ICL7660S
1 - CA3130
20 - 10uf Electro caps (16v-25v)
1 - 5.1v Zener Diode
1 - 1N270 (or anyone know of an sub)
1 - 1N5401 (or anyone know of an sub)
2 - DA-90 Diodes (or anyone know of an sub)
4 - 2SC539
2 - 2SC828
1 - 200k resistor
1 - 7.5k resistor
1 - 422k resistor
10 - .22uf caps
5 - .39uf caps
5 - .082uf caps

Will purchase or trade....email/pm me what you have and what you want for it....

As always, I have to trade:
BB enclosures
3PDT switches
Mono 1/4 in jacks
Stereo 1/4 in jacks
5mm LED Bezels
2.1mm DC Jacks
Carbon Comp Resistors
9v Battery snaps

Thanks Guys!

salocin · Post by **salocin** » 22 Sep 2010, 04:57

Can send you some 2SC828. PM me.

IvIark · Post by **IvIark** » 22 Sep 2010, 08:15

Hi Mike

What are DA90 diodes? Is that OA90 germanium? If so I've got the following bits:

3 - ICL7660S
1 - CA3130
20 - 10uf Electro caps (25V Rubycon non-polar)
1 - 5.1v Zener Diode
1 - 1N270
1 - 1N5401
2 - OA-90 Diodes
1 - 200k resistor
1 - 7.5k resistor (7.15K or 7.87k)
1 - 422k resistor
10 - .22uf caps (poly box)
5 - .082uf caps (Panasonic ECQ-V)

and would be interested in BB boxes, PM if you're interested in a trade

Dan N · Post by **Dan N** » 22 Sep 2010, 18:49

DA-90 was a mis-mark on the Unicord Superfuzz schematic. Supposed to be OA-90. 1N34 or 1N60 or whatever run of the mill Ge diode should be fine.

That schematic also had 2SC539's (metal can silicon). I've never seen any used in a Superfuzz, although I may have seen a guts pic of the fuzz part from a psychedelic machine that had suspicious metal cans on the board.

mikemaddux · Post by **mikemaddux** » 22 Sep 2010, 23:34

Dan N wrote:DA-90 was a mis-mark on the Unicord Superfuzz schematic. Supposed to be OA-90. 1N34 or 1N60 or whatever run of the mill Ge diode should be fine.

That schematic also had 2SC539's (metal can silicon). I've never seen any used in a Superfuzz, although I may have seen a guts pic of the fuzz part from a psychedelic machine that had suspicious metal cans on the board.

hmmmm..............good to know

mikemaddux · Post by **mikemaddux** » 03 Oct 2010, 04:43

BUMP

Still looking for:

1 - 25k Linear Pot
4 - 2SC539
10 - .22uf caps
5 - .39uf caps
5 - .082uf caps

Will purchase or trade....email/pm me what you have and what you want for it....

As always, I have to trade:
BB enclosures
3PDT switches
Mono 1/4 in jacks
Stereo 1/4 in jacks
5mm LED Bezels
2.1mm DC Jacks
Carbon Comp Resistors
9v Battery snaps

Thanks Guys!

ansil · Post by **ansil** » 03 Oct 2010, 06:30

let me check i am pretty sure i still have some 25 lin pots and i know i have a damn box of .22uf is greed drop 100v ok

i have some .33 caps that i think are 10% which would give you .369uf
i got a bag of those too.

hollar at a brother

oh yeah the 2sc539 any special reason it has an hfe from 90-700 thats basically what any standard npn isn't it?

if you need some i have 5088's 5089's god i got too many of these mpsa13's a whole bag of these too

mikemaddux · Post by **mikemaddux** » 03 Oct 2010, 09:34