freestompboxes.org

looking for:

1 - 25k Linear Pot
3 - MAX1044/ICL7660S
1 - CA3130
20 - 10uf Electro caps (16v-25v)
1 - 5.1v Zener Diode
1 - 1N270 (or anyone know of an sub)
1 - 1N5401 (or anyone know of an sub)
2 - DA-90 Diodes (or anyone know of an sub)
4 - 2SC539
2 - 2SC828
1 - 200k resistor
1 - 7.5k resistor
1 - 422k resistor
10 - .22uf caps
5 - .39uf caps
5 - .082uf caps

Will purchase or trade....email/pm me what you have and what you want for it....

As always, I have to trade:
BB enclosures
3PDT switches
Mono 1/4 in jacks
Stereo 1/4 in jacks
5mm LED Bezels
2.1mm DC Jacks
Carbon Comp Resistors
9v Battery snaps

Thanks Guys!

Can send you some 2SC828. PM me.

Hi Mike

What are DA90 diodes? Is that OA90 germanium? If so I've got the following bits:

3 - ICL7660S
1 - CA3130
20 - 10uf Electro caps (25V Rubycon non-polar)
1 - 5.1v Zener Diode
1 - 1N270
1 - 1N5401
2 - OA-90 Diodes
1 - 200k resistor
1 - 7.5k resistor (7.15K or 7.87k)
1 - 422k resistor
10 - .22uf caps (poly box)
5 - .082uf caps (Panasonic ECQ-V)

and would be interested in BB boxes, PM if you're interested in a trade

DA-90 was a mis-mark on the Unicord Superfuzz schematic. Supposed to be OA-90. 1N34 or 1N60 or whatever run of the mill Ge diode should be fine.

That schematic also had 2SC539's (metal can silicon). I've never seen any used in a Superfuzz, although I may have seen a guts pic of the fuzz part from a psychedelic machine that had suspicious metal cans on the board.

Dan N wrote:DA-90 was a mis-mark on the Unicord Superfuzz schematic. Supposed to be OA-90. 1N34 or 1N60 or whatever run of the mill Ge diode should be fine.

That schematic also had 2SC539's (metal can silicon). I've never seen any used in a Superfuzz, although I may have seen a guts pic of the fuzz part from a psychedelic machine that had suspicious metal cans on the board.

hmmmm..............good to know

BUMP

Still looking for:

1 - 25k Linear Pot
4 - 2SC539
10 - .22uf caps
5 - .39uf caps
5 - .082uf caps

Will purchase or trade....email/pm me what you have and what you want for it....

As always, I have to trade:
BB enclosures
3PDT switches
Mono 1/4 in jacks
Stereo 1/4 in jacks
5mm LED Bezels
2.1mm DC Jacks
Carbon Comp Resistors
9v Battery snaps

Thanks Guys!

let me check i am pretty sure i still have some 25 lin pots and i know i have a damn box of .22uf is greed drop 100v ok

i have some .33 caps that i think are 10% which would give you .369uf
i got a bag of those too.

hollar at a brother

oh yeah the 2sc539 any special reason it has an hfe from 90-700 thats basically what any standard npn isn't it?

if you need some i have 5088's 5089's god i got too many of these mpsa13's a whole bag of these too

PM'd