freestompboxes.org

Shouldn't have bought these, just too big. I could put multiple projects in each but I'd rather just sell.

Came from maplins so probably best deals would come from someone who factors postage cost into value We'll see; open to trades as well. Looking for binding posts (round hole with hole and thumbscrew), BB and 145*95 enclosures, NPN Ges in FF ranges (would settle for PNPs and a charge pump ) 25v 220u caps (axial preferred but either) 47u caps in any voltage (2.5mm spacing preferred)... Or money to buy such things from Doc Tweek!

I have:

1 x 'LF14'/AB13 152*102*51mm 200g Sheet metal enclosure, long sides attached to lid, short sides to base (perfect for a sideways double pedal or for a vertical pedal with side jacks). Screws included.

1 x N93BQ die cast, probably eddystone but still in shrink wrap so can't check, 188x120x53mm, 520g 6 screw, you could really fit just about anything in this one...

Postage £2 for the sheet metal, £3 for the die cast or £3.50 for both.

Hope someone has use for these!

I'm interested in the N93BQ, just need to measure up my A/DA Board tommorow...

I have some PNPs and Charge Pumps... some Plastic Enclosures... and probably the Caps, i'll have a look tommorow, plus anything in this thread of course - viewtopic.php?f=17&t=10552

ill buy the enclosures off you. How much do you want?

bencoles wrote:ill buy the enclosures off you. How much do you want?

I'll give you both posted for £14? And chuck in an insulated DC socket for each?

Call it a tenner? I don't have much use for them right now, but maybe soon!