Take Flight Pedals - The Goose Fuzz
- Steven_M
- Resistor Ronker
I saw this and thought it sounded pretty cool.
Demo Video
Website
http://www.takeflightpedals.com/
The gut images are a little small, but was wondering if anyone knew anything about these or had seen better pictures under the hood.
Demo Video
Website
http://www.takeflightpedals.com/
The gut images are a little small, but was wondering if anyone knew anything about these or had seen better pictures under the hood.
- RnFR
- Old Solderhand
Information
posts with gutshots get to go in the boutique section. 
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- DrNomis
- Old Solderhand
Information
- Posts: 6801
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 274 times
i don't suppose you happen to have a schematic for this one,do you?..... 
Kind of reminds me of the Lovetone pedals,like the Brown Source,has anyone built one of those?....
Looks cool anyway....

Kind of reminds me of the Lovetone pedals,like the Brown Source,has anyone built one of those?....
Looks cool anyway....
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
- Steven_M
- Resistor Ronker
Thanks! Still Learning!RnFR wrote:posts with gutshots get to go in the boutique section.
From what I can tell this thing has Cross Over Distortion, a Wet/Dry mix, Octave up, and Oscillation. Be still my beating heart!
Construction looks half decent too! Jacks are off center though, minor pet peeve!
Slightly better picture
- DrNomis
- Old Solderhand
Information
- Posts: 6801
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 274 times
Steven_M wrote:Thanks! Still Learning!RnFR wrote:posts with gutshots get to go in the boutique section.
From what I can tell this thing has Cross Over Distortion, a Wet/Dry mix, Octave up, and Oscillation. Be still my beating heart!
Construction looks half decent too! Jacks are off center though, minor pet peeve!
Wow,you don't often see cros-over distortion implemented in a distortion stompbox,normaly cross-over distortion is something to be avoided in amplifiers since it makes amps sound very rough at low volumes,hmmm...intreguing.....
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
- Crumbchildz
- Solder Soldier
I dig the "shortest distance between 2 points is a straight line" approach to the wiring. So far I see a pair of yellow LEDs and a quad of some type of silicon diodes. Yellows for hard clip to ground, silicon diodes soft clip in the feedback loop, maybe? Or perhaps an arrangement like the Prunes and Custard if we're talking crossover distortion..... Any ideas on the opamps? I can't make them out.
Loud's a tone, right?
- Steven_M
- Resistor Ronker
I couldn't tell if the diodes were yellow or water clear. I'm not sure how much of an effect the photography/surrounding components is having on how we get to perceive the colour.Crumbchildz wrote:I dig the "shortest distance between 2 points is a straight line" approach to the wiring. So far I see a pair of yellow LEDs and a quad of some type of silicon diodes. Yellows for hard clip to ground, silicon diodes soft clip in the feedback loop, maybe? Or perhaps an arrangement like the Prunes and Custard if we're talking crossover distortion..... Any ideas on the opamps? I can't make them out.
- Kregg
- Breadboard Brother
That's a very cool pedal.
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."