Hi,
I found this circuit on diystompboxes. The spacing for the trimmers was a little wide for the parts I could get buy locally.
I have closed up the spacing and added the bias trimmer mentioned on the original circuit.
I've built the effect and the new layout works. Lots of sound options, with trimmers for each section of the circuit.
Thought I would post it up. Hope someone can make use of it.
Cheers.
Insanity Stomp Box.
-
Greenmachine
- Cap Cooler
Information
- Posts: 616
- Joined: 31 Aug 2008, 17:59
- my favorite amplifier: Fender Blackface Deluxe Reverb
- Completed builds: Electra Distortion
Roger Mayer Octavia
Klon Centaur (Bajaman/Soulsonic)
DOD 440 Envelope Filter
MXR Phase 90
DOD FET Preamp
Dallas Arbiter Fuzz Face
Soulsonic Hunny Bunny Overdrive
BYOC Analog Delay
Craig Anderton Headphone Amp
Anderton Mini Amp
Bajaman Real Tube Overdrive
Fender Deluxe 5E3 with Tone Stack Mod.
Fender Princeton 5F2-a
Keen Neovibe
Aquapuss Delay
Anderton AMS-100 Guitar Synth (abandoned)
DOD 280 Compressor
Weird Sound Generator
Beavis Audio Noisy Cricket
80's Rat
ROG Thor
Big Muff
Green Ringer
Shin-Ei Fuzz
MXR Dynacomp
COT50
Really Cheap Compressor - Location: Jersey City, NJ
- Has thanked: 87 times
- Been thanked: 15 times
- Contact:
What does it do?
"[Y]ou want sketchy, dude? I breadboard on a door." -- RnFR, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
"This amp is freakin loud, like crazy, I'm going to kill pets loud." -- mich, 2011
-
mictester
- Old Solderhand
Information
It looks like some kind of distortion box with an op-amp clipper first, driving into a CMOS "valve-sound" circuit, finishing up with a two-FET "µ-amp" circuit.Greenmachine wrote:What does it do?
"Why is it humming?" "Because it doesn't know the words!"
-
DrNomis
- Old Solderhand
Information
- Posts: 6801
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 274 times
mictester wrote:It looks like some kind of distortion box with an op-amp clipper first, driving into a CMOS "valve-sound" circuit, finishing up with a two-FET "µ-amp" circuit.Greenmachine wrote:What does it do?
It is,but it is designed to give insane leveles of gain/distortion....
I remember finding the schematic for this online somewhere....
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
Yeah it's a distortion pedal. I found it at - diystompboxes.com/pedals/schematics.html
I finished today. It's pretty meaty. To say the least.
Worth a build I reckon. Still playing around with the trimmers at the mo. Trying to get the best sound.
I finished today. It's pretty meaty. To say the least.
Worth a build I reckon. Still playing around with the trimmers at the mo. Trying to get the best sound.
-
DrNomis
- Old Solderhand
Information
- Posts: 6801
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 274 times
Here's a link to the website where you can download the Insanity Box Schematic :
https://www.diystompboxes.com/pedals/schematics.html
https://www.diystompboxes.com/pedals/schematics.html
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.