Page 1 of 1
oscilloscope: peakctech 4020
Posted: 14 Nov 2010, 11:17
by chile
Hi everybody, I've triyed to add my questione to the "cheap oscilloscope" tread by Modman but I can't post on it...
so here's my question, I've found a peakctech 4020 for 70 euro, is it any good? does it worth the money?
thanks in advance
Re: oscilloscope: peakctech 4020
Posted: 15 Nov 2010, 05:22
by DrNomis
chile wrote:Hi everybody, I've triyed to add my questione to the "cheap oscilloscope" tread by Modman but I can't post on it...
so here's my question, I've found a peakctech 4020 for 70 euro, is it any good? does it worth the money?
thanks in advance
Hard to say without seeing what it looks like...can you post a pic of it?....
Check out the pics of my two Oscilloscopes in the Workbench section,they are both good for electronic work....

Re: oscilloscope: peakctech 4020
Posted: 15 Nov 2010, 16:54
by chile
some pic:

Re: oscilloscope: peakctech 4020
Posted: 18 Nov 2010, 03:56
by DrNomis
chile wrote:some pic:

Yeah,I reckon it is worth the money,since it is a dual trace scope,a 10Mhz bandwith is still good for audio work,chile....
If it doesn't come with probes,you should be able to buy some at a local electronics parts store,a couple of 60Mhz probes will work fine....

Re: oscilloscope: peakctech 4020
Posted: 18 Nov 2010, 14:22
by chile
thanks Dr.Normis
it's a 40mhz, no clear in the pics..
Also, I've find another one for 30 euros without probes and with defect...
pic below ...
does it will be repairable? the guy shot the pic by connecting a simple wire to the connector and touching it with hands because he doesn't have probes neither he knows how it works...