Misc bits going in the bin if nobody wants them & amp cab

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
Post Reply
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

At my parents for one more day and found this stuff; going home tomorrow so will take it with me to post if anyone can use it (for postage & change or for a couple of parts)
FREE:
Random crap from my dad, can't keep it but might be somebody's treasure:

Pair of 2 pin DIN (fem) to stereo 6.35mm (male) adapter

Circular TV arial with a 6" cable to RCA male

9" straight arial terminating in a solder lug

MP3 CD player

I wil take the following home with me when I go and have it couriered if someone can use it:
NOT FREE:
DEAD Fender Champ 110 with all the knobs, jacks, speaker, mini reverb tank (cardboard!!!) everything still inside; pretty sure some fucker blew the power semiconductors by running a bass through it at "10" on every dial. Absolutely ideal for a DIY amp; you could even use the PT for an SS build. Chassis drilled for 7 knobs 4 sockets: FX loop? Headphone out? Still probably worth something as a 1x10 cab with none of that stuff. I realise it may not be cheap to post but shoot me an offer if it's worth something to you!

Fender 1991 Japanese Fat Strat with reverse headstock and Floyd Rose II tremolo. Definitely a project; the body is in dire need of a refinish, not least because of what a teenage me drew on with tippex (nothing offensive!) but that will probably crumble off; however don't kid yourself about this being mint by any stretch. Trem has been blocked but was fully working before I blocked it; small chip of the trem mounting hole missing that doesn't affect operation. Will include a hard case to ship it in but the hard case has no handle. Pots and switch not original, pickups are. Probably worth more as parts then as a guitar but will always cut a deal for FSBers ;) Still plays mind, though i had it set up as a bowing guitar (pickups suitably protected).

Pictures of course on request
Testing, testing, won too fwee
Top
User avatar
RnFR
Old Solderhand
Information
Posts: 4880
Joined: 09 Jan 2008, 06:02
my favorite amplifier: Traynor YBA-III, Fender Super Six
Completed builds: custom fuzz.
Location: Inner Earth
Has thanked: 139 times
Been thanked: 133 times
Contact:
Contact RnFR

Post by RnFR »

I'll take that strat! you in the states? wait, that not free or for parts is it?
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic

Blog-APOCALYPSE AUDIO
Top
User avatar
Scruffie
Opamp Operator
Information
Posts: 1740
Joined: 13 Mar 2009, 17:59
Location: UK
Has thanked: 28 times
Been thanked: 169 times

Post by Scruffie »

He's in the U.K. Which means, Strat for me! Maybe... Could I see a picture?
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

The strat is not free, sorry :(

Could a mod edit that post? I tried to split them into "free" and "for sale" but missed one of my headers :(

Sorry guys, if you saw my overdraft you'd understand!
Testing, testing, won too fwee
Top
User avatar
Duckman
Opamp Operator
Information
Posts: 1492
Joined: 20 May 2009, 01:45
Has thanked: 320 times
Been thanked: 133 times

Post by Duckman »

Anithing for free goes to wireconnect, period. He claim it first :lol:
Top
User avatar
RnFR
Old Solderhand
Information
Posts: 4880
Joined: 09 Jan 2008, 06:02
my favorite amplifier: Traynor YBA-III, Fender Super Six
Completed builds: custom fuzz.
Location: Inner Earth
Has thanked: 139 times
Been thanked: 133 times
Contact:
Contact RnFR

Post by RnFR »

Hides-His-Eyes wrote:The strat is not free, sorry :(

Could a mod edit that post? I tried to split them into "free" and "for sale" but missed one of my headers :(

Sorry guys, if you saw my overdraft you'd understand!
that's kinda what I figured after I reread the post. I'll see what I can do about editing.

------------
there, is that correct?
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic

Blog-APOCALYPSE AUDIO
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Yes that's right! Sorry guys for the disappointment.

Do not kid yourselves that I expect a huge amount for either though.
Testing, testing, won too fwee
Top
User avatar
DeanM
Resistor Ronker
Information
Posts: 441
Joined: 05 Jan 2010, 20:42
my favorite amplifier: Marshall VM 2466
Location: Ireland
Has thanked: 21 times
Been thanked: 5 times

Post by DeanM »

If you decide to split the strat for parts let me know cos i might be interested in the Floyd Rose II. actually id have to check it fits my jackson which has a floyd rose licensed trem first but just thinkin out loud!

The champ could be a cool little project! i wouldnt even have time but for someone with the time could maybe gut it and try stick a valve or two in it! maybe even miniture valves for a compact power amp or use subminis like FC's murder1! Maybe even go all out and stick in a G10M celestion!

Cardboard reverb tank??!! that i gotta see! :popcorn:
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

FREE:

keybed from a M-audio midi controller. 25 keys, 2 diodes per key so assume it's velocity controlled. Terminates in a 16 pin connector but I'm sure you could do your own thing with it using the diode holes if needed.

building a synth maybe?

If you can use it, any donations (parts, money) gratefully received

For £10 + shipping I will include the case, which has on it:

-8 bit LED
-8 right angle rotary pots + soft touch knobs
-Looks like four dual right angle pots
-couple of mini clicky buttons

Lower part of the case has a mainboard with jack and XLR connectors

Really a perfect synth project but the mainboard is absolutely DEAD, only the electromechanical are worth saving IMO
Testing, testing, won too fwee
Top
User avatar
robinbowes
Breadboard Brother
Information
Posts: 146
Joined: 06 Jan 2011, 14:07
Location: York, UK
Has thanked: 17 times
Been thanked: 6 times

Post by robinbowes »

Still got the Strat? Where in the UK Are you? How much? Got any pictures?

R.
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Had to leave the strat behind at my parents, will drop you a PM when I'm next there if that's ok?

Chris
Testing, testing, won too fwee
Top
User avatar
robinbowes
Breadboard Brother
Information
Posts: 146
Joined: 06 Jan 2011, 14:07
Location: York, UK
Has thanked: 17 times
Been thanked: 6 times

Post by robinbowes »

Hides-His-Eyes wrote:Had to leave the strat behind at my parents, will drop you a PM when I'm next there if that's ok?
Sure - no rush. But my questions still apply - well, apart from the one asking if you still have it! ;)

R.
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Can't take pictures when it's not with me, sorry, and I was hoping for about £100 for the strat, £10 for the flight case and then courier costs door to door. :)

It can be in Bristol or Cheshire depending on if either of those are close to you.
Testing, testing, won too fwee
Top
User avatar
robinbowes
Breadboard Brother
Information
Posts: 146
Joined: 06 Jan 2011, 14:07
Location: York, UK
Has thanked: 17 times
Been thanked: 6 times

Post by robinbowes »

Tell you what - take some pics when you're next back home and we'll take it from there.

Cheers,

R.
Top
User avatar
robinbowes
Breadboard Brother
Information
Posts: 146
Joined: 06 Jan 2011, 14:07
Location: York, UK
Has thanked: 17 times
Been thanked: 6 times

Post by robinbowes »

Any news on the Strat? I'm still interested...
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Going to fetch it in just over a week; you and one other guy both expressed interest, will get some pictures on the 1st april.
Testing, testing, won too fwee
Top
User avatar
DrNomis
Old Solderhand
Information
Posts: 6801
Joined: 16 Jul 2009, 04:56
my favorite amplifier: Self-Built Valve Amp Head :)
Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
Location: Darwin,Northern Territory Australia
Has thanked: 98 times
Been thanked: 274 times

Post by DrNomis »

Hides-His-Eyes wrote:FREE:

keybed from a M-audio midi controller. 25 keys, 2 diodes per key so assume it's velocity controlled. Terminates in a 16 pin connector but I'm sure you could do your own thing with it using the diode holes if needed.

building a synth maybe?

If you can use it, any donations (parts, money) gratefully received

For £10 + shipping I will include the case, which has on it:

-8 bit LED
-8 right angle rotary pots + soft touch knobs
-Looks like four dual right angle pots
-couple of mini clicky buttons

Lower part of the case has a mainboard with jack and XLR connectors

Really a perfect synth project but the mainboard is absolutely DEAD, only the electromechanical are worth saving IMO

Do you still have this?.... :D
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Sorry man, that one ended up in the bin in the end. RIP :(
Testing, testing, won too fwee
Top
User avatar
DrNomis
Old Solderhand
Information
Posts: 6801
Joined: 16 Jul 2009, 04:56
my favorite amplifier: Self-Built Valve Amp Head :)
Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
Location: Darwin,Northern Territory Australia
Has thanked: 98 times
Been thanked: 274 times

Post by DrNomis »

Hides-His-Eyes wrote:Sorry man, that one ended up in the bin in the end. RIP :(

No worries mate.... :D
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
Top
User avatar
Hides-His-Eyes
Tube Twister
Information
Posts: 1943
Joined: 02 Feb 2010, 12:34
Has thanked: 50 times
Been thanked: 49 times

Post by Hides-His-Eyes »

Testing, testing, won too fwee
Top
Post Reply

Return to “Parts & Tools Sourcing & Trading”