Eddystone A,B, BB Enclosures in Germany

Seiche · Post by **Seiche** » 02 Mar 2011, 10:01

I just found this Website:
http://www.schukat.com/schukat/schukat_ ... A27969PSLA
(Minimum Order: 25 EUR; Postage to GER: 5,50 EUR)

The Prices are pretty good, especially for the A enclosures that regularly cost more than B sized ones anywhere else.
I was wondering if anyone would be interested in a group buy, unfortunately i probably can't lay out the costs of a large order beforehand.

I would want to take three or four A sized enclosures and five to six B sized enclosures.

cheers

andersom · Post by **andersom** » 02 Mar 2011, 10:53

Thats looking good, i would be in for a group buy. it looks like schukat doesnt have any stock thow.
I would be in for 10/20 b sized boxes depending on price.
Look here http://www.canford.co.uk/Products/16-70 ... CAST-BOX-C

Thats even cheaper

Seiche · Post by **Seiche** » 02 Mar 2011, 11:30

yeah they have stock of 500 of the A and BB kind, and over 1000 of the B size. You can actually switch the language on the website to english if you want (top left).

the link you posted is pretty cheap as well, but notice that the prices are in pound sterling and that would be the same (a little bit more) than the Schukat price for 10 pieces, unless we buy 100+. Also Schukat shipping is rather cheap (inside germany, don't know about euro shipping).

Hides-His-Eyes · Post by **Hides-His-Eyes** » 02 Mar 2011, 12:08

Don't know what shipping's like for you guys, but gapco have real hammond (not just eddystone) pretty cheap I think:

gapco.co.uk

Seiche · Post by **Seiche** » 02 Mar 2011, 13:57

i couldn't find them, only the GAPco home brand, which is about the same pricewise. Can you post a link?
I really like the eddystone enclosures because they have real corners not the round ones.
And they have a better feel than those taiwanese/chinese ones that are all rough.

andersom · Post by **andersom** » 02 Mar 2011, 17:50

Seiche, my german isnt all that.... Are those prices including vat?

Seiche · Post by **Seiche** » 02 Mar 2011, 19:37

Ah shit, no they aren't. Good call, I always forget that

so that's plus 19% on the prices.

andersom · Post by **andersom** » 02 Mar 2011, 19:56

Then probably the best place is the UK.
I'll look in it tommorow

have a good one

DeanM · Post by **DeanM** » 03 Mar 2011, 00:09

andersom wrote:Thats looking good, i would be in for a group buy. it looks like schukat doesnt have any stock thow.
I would be in for 10/20 b sized boxes depending on price.
Look here http://www.canford.co.uk/Products/16-70 ... CAST-BOX-C

Thats even cheaper

Man nice find! looks good!

I'd also potentially be interested in a group buy.

Chugs · Post by **Chugs** » 03 Mar 2011, 09:19

These might be a bit cheaper if you are buying a few...

http://www.rapidonline.com/Tools-Fasten ... ures/71713

andersom · Post by **andersom** » 03 Mar 2011, 09:27

Those prices are without vat.. I dont know about the canford site thow

Seiche · Post by **Seiche** » 07 Mar 2011, 19:11

any updates?

btw.: would be nice if there was similar cheap source for 125B/1590N1 (~122x67x36mm) enclosures.

Hides-His-Eyes · Post by **Hides-His-Eyes** » 07 Mar 2011, 20:00

I think rapid do something that size

Seiche · Post by **Seiche** » 08 Mar 2011, 19:00

Hides-His-Eyes wrote:I think rapid do something that size

do you have a part number? can't find it

Hides-His-Eyes · Post by **Hides-His-Eyes** » 08 Mar 2011, 21:07

30-3926 (out of stock)

30-3540 (in stock)

Seiche · Post by **Seiche** » 08 Mar 2011, 21:38

unfortunately they're too expensive

Hides-His-Eyes · Post by **Hides-His-Eyes** » 08 Mar 2011, 21:55

Sorry buddy

andersom · Post by **andersom** » 10 Mar 2011, 17:40

I asked canford if the prices are vat included. Still no answer...

Anybody know if these prices are vat included?

Seiche · Post by **Seiche** » 20 Mar 2011, 11:38

Schukat has just gotten even cheaper
http://www.schukat.com/schukat/schukat_ ... C&kb=G5114

starting to be really worth it (take 10 A sized boxes and it's about 3 each incl. VAT)

andersom · Post by **andersom** » 20 Mar 2011, 11:49

Thats good news i'll look into it tommorrow

thanks for the heads up