Lovepedal Delux Sixty MOSFET Boost. [traced]
- Greg
- Old Solderhand
- culturejam
- Old Solderhand
Information
Wow. His old stuff really does suck a lot of ass. I'm glad Sean started letting somebody else do the pedal building for him.
- euronymous0001
- Breadboard Brother
no static protection? 
- sinner
- Old Solderhand
Information
- Posts: 4710
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 907 times
Top quality as always! Nice done Greg
- sinner
- Old Solderhand
Information
- Posts: 4710
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 907 times
Mislabeled resistors above 
Corrected with few add-ones
Corrected with few add-ones
- joeboo88
- Resistor Ronker
I just built a okko diablo, i was wondering can i use this as the boost instead of the boost that goes with the diablo?
here is the link to the layouts...thanks in advance for any input
https://www.freestompboxes.org/viewtopic ... o&start=60

here is the link to the layouts...thanks in advance for any input
https://www.freestompboxes.org/viewtopic ... o&start=60
Ebay is a fucker ~ Sinner - If this is something unique, then I'm a teletubbie ~also Sinner
- sinner
- Old Solderhand
Information
- Posts: 4710
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 907 times
and one more with on-board pot
- Nocentelli
- Tube Twister
Information
- Posts: 2211
- Joined: 09 Apr 2009, 07:06
- Location: Leeds, UK
- Has thanked: 1115 times
- Been thanked: 939 times
So is this pretty much a SHO with a volume control on the output instead of a gain control pot on the mosfet's source?
modman wrote: ↑ Let's hope it's not a hit, because soldering up the same pedal everyday, is a sad life. It's that same ole devilish double bind again...
- Greg
- Old Solderhand
Pretty similar, but with a High Pass filter on the output side.Nocentelli wrote:So is this pretty much a SHO with a volume control on the output instead of a gain control pot on the mosfet's source?
A filter that's affected by the pot in parallel and potentially by the input impedance of the following device.
culturejam wrote: We are equal opportunity exposure artists.
- RnFR
- Old Solderhand
Information
no offense greg, you know I love buddy
, but i just cant hit the thanks button. do we have go keep tracing these worthless lovepedal pedal POSs? it just seems like a waste of time, cuz everyone knows that ol seany can't design his way out of a paper bag without his paid engineering lackey doing the hard work. I mean, I know the guy deserves a butt raping sans reacharound, but I'd really appreciate something I'd like to play, rather than chuck against a wall. how bout an EQD Mantra or Monarch? maybe we can get that fix'd fuzz done? I mean shit, at least Zacko threw in an extra transistor when he knew the MOSFET would probably blow
. of course a 10c diode would do the trick!
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- culturejam
- Old Solderhand
Information
I think it's a worthwhile exercise, so long as someone is interested in doing the tracing. Can't hurt.RnFR wrote:do we have go keep tracing these worthless lovepedal pedal POSs?
- Greg
- Old Solderhand
Well mate... "we" don't have to do them.. everything I've ever traced was bought by me and traced with my time and burnt fingers, so there's no need for anyone else to do any more than glance at the thread and decide if there's any interest.RnFR wrote:no offense greg, you know I love buddy, but i just cant hit the thanks button. do we have go keep tracing these worthless lovepedal pedal POSs? it just seems like a waste of time, cuz everyone knows that ol seany can't design his way out of a paper bag without his paid engineering lackey doing the hard work. I mean, I know the guy deserves a butt raping sans reacharound, but I'd really appreciate something I'd like to play, rather than chuck against a wall. how bout an EQD Mantra or Monarch? maybe we can get that fix'd fuzz done? I mean shit, at least Zacko threw in an extra transistor when he knew the MOSFET would probably blow
![]()
. of course a 10c diode would do the trick!
If I have something that's gooped and I intend to sell.. I'm gonna take a look inside first and share it with the forum.
Generally they're effects I already have from years gone by (as in this case), but the Karl I bought just to trace as it's a very decent sounding pedal (check out Fatback's video of the Karl on YouTube if you have any doubts).
Remember that there's no way of knowing what's inside until after the de-gooping is done, and also remember that the Eternity, COT, etc have been pretty popular projects here... so is the Superlead for that matter, and not forgetting the fun we had with the Amp 11.
Sean's builds are often shitty, but the guy does have a good ear IMO.
As far as EarthQuakeDevices.. really ?
I have no experience with them, but this doesn't impress me much: https://www.freestompboxes.org/viewtopic ... ke+devices
YAFF..
The Hummingbird is a clone.. is there any evidence the others are well designed or original ?
Just a guess based on the description.. but I think you might find the basic design of the Monarch here: http://www.runoffgroove.com/
culturejam wrote: We are equal opportunity exposure artists.
- RnFR
- Old Solderhand
Information
please, pardon my delivery.
was a bit tipsy! there's nothing wrong with reversing anything. i guess i'm just getting really sick of lovetone. i mean, come on, no protection on the mosfet? that is absolute beginner stuff.
as far as the monarch goes, that very well could be. didn't see any trimmers, though that doesn't mean it isn't similar. i find the other two pedals very interesting, and they don't sound like clones to me.
as far as the monarch goes, that very well could be. didn't see any trimmers, though that doesn't mean it isn't similar. i find the other two pedals very interesting, and they don't sound like clones to me.
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- Greg
- Old Solderhand
Lovetone ? still tipsyRnFR wrote:please, pardon my delivery.was a bit tipsy! there's nothing wrong with reversing anything. i guess i'm just getting really sick of lovetone. i mean, come on, no protection on the mosfet? that is absolute beginner stuff.
as far as the monarch goes, that very well could be. didn't see any trimmers, though that doesn't mean it isn't similar. i find the other two pedals very interesting, and they don't sound like clones to me.
It's all good bro..
A lot of the Lovepedal stuff has basic mistakes for sure, but they can often be modded/improved, or used as building blocks.
There was nothing much to this one, but it's a good sounding clean boost and there was no telling what it was until the goop was off.
Once seen, I had to share.. and tracing took all of 5 minutes.
culturejam wrote: We are equal opportunity exposure artists.
- RnFR
- Old Solderhand
Information
lovetone, lovepedal, same frickin thing.
after while it all runs together. 
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO