Page 1 of 1
Devi Ever / Effector 13 schematics and build info
Posted: 03 May 2011, 20:17
by Devi Ever
Just posted up a bunch of new schematics, plus there's a lot of new build info I think since the last time I posted here... anyhow...
http://www.shoegazers.org/viewforum.php?f=192
Re: Devi Ever / Effector 13 schematics and build info
Posted: 04 May 2011, 11:08
by G5120fx
Very nice Devi, thanks!
I tried my very first vero layout, not sure if it´s correct but I´ve never done a Vero Layout before. It´s unverified, corrections and tips are appreciated!
So here it is:
Re: Devi Ever / Effector 13 schematics and build info
Posted: 04 May 2011, 13:48
by G5120fx
I did it again (or tried again)....
Karaoke Party
Re: Devi Ever / Effector 13 schematics and build info
Posted: 04 May 2011, 14:20
by jb351
Thanks for sharing them with us. I look forward to trying out a couple on the breadboard.
Re: Devi Ever / Effector 13 schematics and build info
Posted: 09 Jun 2011, 18:38
by separanets
Dork wrote:Very nice Devi, thanks!
I tried my very first vero layout, not sure if it´s correct but I´ve never done a Vero Layout before. It´s unverified, corrections and tips are appreciated!
So here it is:
Two cuts are missing I think: e6 (nextto Q1 below 3M3) and e19 (next to Q4 below 2M2)
Re: Devi Ever / Effector 13 schematics and build info
Posted: 11 Jun 2011, 23:07
by Revelation
Thanks Devi!
Re: Devi Ever / Effector 13 schematics and build info
Posted: 16 Jun 2011, 08:48
by rasta_maleek
thanx for share devi.
its an honor to know the fuzz lady in exelence.
let´s try those circuits
bye.
Re: Devi Ever / Effector 13 schematics and build info
Posted: 22 Jun 2012, 11:13
by Devi Ever
Updated link here :
http://www.deviever.com/fx/diy-schematics/
Will be adding more as time goes on.
Re: Devi Ever / Effector 13 schematics and build info
Posted: 22 Jun 2012, 19:21
by AL
Thank you!
AL
Re: Devi Ever / Effector 13 schematics and build info
Posted: 22 Jun 2012, 19:26
by sinner
AL wrote:
Thank you!
AL
We all thank you
