Page 1 of 1
Fulltone - Distortion Pro (Schem and PCB)
Posted: 12 Jul 2007, 02:29
by call1800ksmyazz
Posted: 12 Jul 2007, 06:03
by analogguru
And here are the:
Fulltone Distortion Pro guts
analogguru
Posted: 12 Jul 2007, 06:45
by soulsonic
I have a friend who has one of these. He said it didn't sound that great and it broke after a month. I should see if he'll let me have a go at fixing it and maybe see about improving it.
I'm not suprised to see that it's a total ripoff of an AMZ circuit. If we learn anything from studying schematics, it's that there's hardly any original boxes out there.
Posted: 12 Jul 2007, 07:18
by Igloo
Do they have a deal something?
Fuller wouldn't rip him twice. Would he?
Posted: 12 Jul 2007, 07:29
by analogguru
They settled at least.
analogguru
Posted: 30 Oct 2007, 00:08
by modman
I've moved this thread to the Project folder, as everything is provided in this thread: schematics, transfer file, parts layout.
Build reports and tweaks? Bring them on!
Re:
Posted: 13 Oct 2008, 14:34
by ilpfis
Hello !!!!
I make this pedal adding the jumper for 9v and potentiometers of 25k lin resonance, voicing log 25k, 25k lin self explatory, saturation 1k log, level 100k lin, drive 100k log, but there is a short circuit, the resistance of 47 ohms of 9-volt heater, I do not understand!! Please help me
http://c3.ac-images.myspacecdn.com/imag ... 5cb7f2.jpg
