Here are the guts to a cool volume pedal that can simulate a backwards guitar. Sorry about the picture quality my camera refuses to focuswhen i use the zoom.
the IC chips say: U5: too small to read.
U3 and U4: HCF4016BE
W990A9735
Malaysia
U2: 4558D
JRC
7398B
U1: MC14013BCP
FOL9806
do you have a macro setting on your camera? that usually helps a lot for gutshots.
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
I have a Snarling Dog Erogenous Moan Pedal where only the volume pedal side of the unit works. Clicking the switch to use the reverse side does nothing, no change in sound or LED lighting up. The wiring seems to be stock but I have nothing to compare it to, so I'm not sure. Any help on this would be greatly appreciated!
I have one and love the enclosure,the pedal developed a click at the end of the run,I gave it a whirl and changed the volume pot side and the click was gone ,the original pots are sealed,the backwards tape effect sucks but I will try changing the pot and see how it goes.
thanks everyone for investigating this thing, I've always wanted to try it but never shell out for.
Aharonimacaroni wrote:I have one and love the enclosure,the pedal developed a click at the end of the run,I gave it a whirl and changed the volume pot side and the click was gone ,the original pots are sealed,the backwards tape effect sucks but I will try changing the pot and see how it goes.
I might be wrong I have never used this pedal but based on the description, I thought the "click" was an intended feature on the pedal
The Erogenous Moan is a volume/reverse volume pedal, and can be used as a straight volume pedal. Pushing the footpad causes the volume to swell. At the end of the sweep, the volume cuts off completely. Reversing the process, the volume kicks in, and swells again. At the top of the sweep, the volume cuts off with a simulated click of a guitar pick.[/b] The effect is haunting.
Thanks for the schematic. It definitely helped for wiring up the switch. However I still have the same issue of the volume side working but the reverse doesn't work. Which IC controls the reverse of the pedal?
Hello,
I am looking for a picture of how the mode switch on the side is wired. Can some one please take a picture for me?
Also where can I buy (or make) a bottom panel?
Thanks!