FS: Aqua Puss clone PCBs (V1)

theehman · Post by **theehman** » 18 Jul 2011, 19:00

I have 6 pieces of the original version of the Aqua Puss delay PCB that was sold here at FSB. I ended up buying some of the revised PCBs before I got these loaded. I'd like to get $5 each plus $2 shipping in the US. Please email me at theehman AT gmail DOT com, do not PM.

The original thread: https://www.freestompboxes.org/viewtopic.php?f=7&t=4216

The boards will need a small jumper on the back. See this post here: https://www.freestompboxes.org/viewtopic ... 220#p54377

Board pics (courtesy of abfackeln)

LaceSensor · Post by **LaceSensor** » 18 Jul 2011, 19:52

emailed.

theehman · Post by **theehman** » 19 Jul 2011, 01:54

5 left. Thanks, LaceSensor!!

BraindeadAudio · Post by **BraindeadAudio** » 25 Jul 2011, 21:30

Just emailed you.

brentm · Post by **brentm** » 26 Jul 2011, 14:07

Doh, thread is hidden/gone. Are these etched or printed/layered boards?

theehman · Post by **theehman** » 26 Jul 2011, 14:23

brentm wrote:Doh, thread is hidden/gone. Are these etched or printed/layered boards?

Printed and layered.

theehman · Post by **theehman** » 31 Aug 2011, 19:11

2 boards left!!

theehman · Post by **theehman** » 13 Sep 2011, 18:48

All gone!! Thanks everybody!

joesatch · Post by **joesatch** » 29 Aug 2016, 18:04

i got one of these boards. Unfortunately in the main thread, all the docs were hosted on a site that is now defunct. IF anyone has build/layout docs on this i would be much appreciative!

puppiesonacid · Post by **puppiesonacid** » 08 May 2018, 21:36

joesatch wrote:i got one of these boards. Unfortunately in the main thread, all the docs were hosted on a site that is now defunct. IF anyone has build/layout docs on this i would be much appreciative!

Same here.
If my memory serves me
Correct i think there was an error on the board and a trace needed ro be cut and jumped to correct.

jt · Post by jt » 14 May 2018, 06:41

I built mine using these two files.

puppiesonacid · Post by **puppiesonacid** » 14 May 2018, 15:35

Perfect! Thank you : )