Eagle Tips, Tricks, Help and other Useful Information
- Bside2234
- Resistor Ronker
Well it looks like you have "vb" coming off the supply filtering and "-vb" on the main circuit. If you mean for them to be connected, change the -vb to vb. If you don't mean for them to be connected there is nothing connected to vb or -vb.
- Chugs
- Resistor Ronker
What is the difference between using the LINE tool and the NET tool to connect components? I have watched a couple of Eagle video tutorials where the Line tool is used to connect components but I have also that using the Net tool is recommended to connect components.
- marshmellow
- Cap Cooler
From the official tutorial: "Do not use the WIRE command to draw net or bus lines in the schematic. Use NET or BUS instead!"
Definitely recommended to read instead of watching videos by experts .
Definitely recommended to read instead of watching videos by experts .
- darthoverdrive
- Breadboard Brother
If this is in the wrong area please let me know.
I have a design I want to share in the Ready To Build Projects if I can ever get the PCB portion done.
I’m using an opamp to create my ½ voltage reference. When I check for errors on my schematic I get the following errors;
OUTPUT and SUPPLY pins mixed on net VR. Also the POWER going to my opamps show a warning. Is it ok to approve these or is there something that I’m missing in the layout?
Thanks!
I have a design I want to share in the Ready To Build Projects if I can ever get the PCB portion done.
I’m using an opamp to create my ½ voltage reference. When I check for errors on my schematic I get the following errors;
OUTPUT and SUPPLY pins mixed on net VR. Also the POWER going to my opamps show a warning. Is it ok to approve these or is there something that I’m missing in the layout?
Thanks!
- grrrunge
- Diode Debunker
Information
As long as "the error makes sense", it's okay to approve I've had quite a few PCB's fabbed, with the two errors you've just mentioned. Those are more like "Are you sure this is how you'd like stuff done?" messagesdarthoverdrive wrote:If this is in the wrong area please let me know.
I have a design I want to share in the Ready To Build Projects if I can ever get the PCB portion done.
I’m using an opamp to create my ½ voltage reference. When I check for errors on my schematic I get the following errors;
OUTPUT and SUPPLY pins mixed on net VR. Also the POWER going to my opamps show a warning. Is it ok to approve these or is there something that I’m missing in the layout?
Thanks!
The reason the power pins throw an error is that they will automatically connect to certain nets (V+ and V- i think). The one with output pins to supply nets - no idea...
A true believer in the magic of Sherwood Forest Pedal Pirates
---
New base of operations: http://www.knucklehead.dk
---
New base of operations: http://www.knucklehead.dk