Page 2 of 2
Re: TC Electronic - Röttweiler
Posted: 01 Mar 2012, 17:03
by Ice-9
grrrunge wrote:I ordered it from thomann today. It's on ot's way to Denmark now!
I look forward to hearing your comments on what it sounds like. The AMT pedal I got from thomann only took 2 days to arrive so you won't have long to wait. I mentioned that the Darkmatter may share the same pcb but after doing a bit of research i think the Darkmatter and the mojo prob share the pcb and the Rottweiler being much higher gain might have a different pcb altogether. i do suspect a similar arrangement for a Baxandall tone shape along with the same optoisolator bypass circuit.
To get some pcb pictures you will need a torx screwdriver to remove the platic shield over the pcb, you will see what i mean when you take the bottom off of the battery compartment.
I hope you like it grrrunge as I know you have been waiting for one of these for a while.
Re: TC Electronic - Röttweiler
Posted: 02 Mar 2012, 14:36
by RnFR
I want to see this pcb shield.
Re: TC Electronic - Röttweiler
Posted: 02 Mar 2012, 20:43
by Ice-9
RnFR wrote:I want to see this pcb shield.
its just a plastic cover to protect the pcb,which is screwed onto the pcb, so when the bottom case cover is removed to replace the battery the pcb is protected, nice touch but nothing special.
Re: TC Electronic - Röttweiler
Posted: 02 Mar 2012, 21:33
by culturejam
RnFR wrote:I want to see this pcb shield.
I'm sure it's just like this one:
viewtopic.php?f=29&t=13350&hilit=TC+flashback&start=20
Re: TC Electronic - Röttweiler
Posted: 03 Mar 2012, 03:49
by grrrunge
That's similar to the one from my polytune. I suppose that's it
Re: TC Electronic - Röttweiler
Posted: 04 Mar 2012, 10:14
by Ice-9
grrrunge wrote:
That's similar to the one from my polytune. I suppose that's it
Yes thats exactly what I was talking about.
Re: TC Electronic - Röttweiler
Posted: 08 Mar 2012, 04:59
by grrrunge
It arrived a couple of days ago, and i've gotta say, i fuckin' love it!
Pic's are coming this weekend. I haven't got the time before then...
Re: TC Electronic - Röttweiler
Posted: 09 Mar 2012, 17:04
by grrrunge
Re: TC Electronic - Röttweiler
Posted: 09 Mar 2012, 21:45
by Ice-9
Thanks for the pics .
I notice all the board layout below the the jacks is the same as the Darkmatter, so we can assume the input and first buffer and power using an opamp for vref is all the same. North side of the jacks is all a bit different, I see symetrical clipping with 2 diodes back to back.
Re: TC Electronic - Röttweiler
Posted: 12 Oct 2012, 15:08
by Nicht Bernd
any news?
