Page 1 of 1
Guyatone - TZ-2 The Fuzz [schematic]
Posted: 27 Dec 2011, 08:23
by Gila_Crisis
thanks to this tread:
https://www.freestompboxes.org/viewtopic ... zz#p110802 I was able to get the schem of this pedal.
So now I wanted to share it with you.
greets
Gila
Re: Guyatone TZ2 The Fuzz
Posted: 28 Dec 2011, 09:42
by Bernardduur
Cool! Looks like a superfuzz with a preset tone knob!
Re: Guyatone TZ2 The Fuzz
Posted: 28 Dec 2011, 10:42
by DrNomis
My thoughts too, I had a look at the schem and I couldn't help thinking to myself "Geez, that looks awfully like the Superfuzz schem"....
Re: Guyatone TZ2 The Fuzz
Posted: 28 Dec 2011, 10:45
by Bernardduur
Just read the description on the Gyatone site and they claim that it is their version of the Superfuzz!
Re: Guyatone TZ2 The Fuzz
Posted: 28 Dec 2011, 16:33
by mictester
It's a Superfuzz with an op-amp wrapper and modern electronic switching. It's a sort of 21st century homage to the 1970s original!
Re: Guyatone - TZ-2 The Fuzz
Posted: 26 Nov 2018, 01:56
by hemisfeer
Hey everyone! A big thank you to those who came up with the schematic for this. It was a huge help. I have a unit that is very low in volume and doesn't seem to sound any different between on and off. I get the fuzz effect whether its on or off.
The volume doesn't seem to have an effect on the sound, but the depth does. Could the problem be in the switching circuit that's controlled by the FET's? I'm thinking of changing out Q2 and Q7. Any advice would be greatly appreciated. Thanks.