Page 1 of 1
Quality Pile 'O Parts
Posted: 08 Mar 2012, 18:39
by Govmnt_Lacky
I have the following left over parts that I would like to sell as a group.
( 1 ) set of breadboard jumpers from Mammoth P/N: 4SBRD-BNDL75
( 2 ) PEC 1M pots (perfect for the Mr. Multi project)
( 5 ) Bourns Long Life 100KB pots P/N: PDB242-S42SK-104B2
( 3 ) Bourns 500KB pots P/N: PDB241-GTR02-504B0
( 2 ) Bourns 100KA pots w/ DPDT switch P/N: PDB183-GTR01-104A2
( 2 ) Bourns 500KB pots w/ DPDT switch P/N: PDB183-GTR01-504B0
( 1 ) Bourns 500KB pot (Sorry... no P/N)
( 4 ) VTL5C3/2 Vactrols. Brand new
( 8 ) VTL5C4/2 Vactrols. Brand new
( 8 ) VTL5C2 Vactrols. Brand new
( 4 ) Triad magnetics transformers P/N: FS24-100. Good for some GGG power supply projects.
( 15 ) ALPS 16mm 5KA pots w/ mounting hardware
( 15 ) ALPS 16mm 5KB pots w/ mounting hardware
Pots are TOP quality audio and the transformers and vactrol are new from factory.
Looking for $150 shipped (in US). For international, I will do the best on shipping price.
I will throw in a few High gain/Low leak Germanium transistors for someone willing to buy the whole sha-bang!
Make me an offer too

Re: Quality Pile 'O Parts
Posted: 10 Mar 2012, 01:53
by skylark44
What would you want for the Bourns 500kb pots (all of 'em)?

Re: Quality Pile 'O Parts [found/sold]
Posted: 11 Mar 2012, 22:50
by skylark44
I'm still interested, FWIW.

Re: Quality Pile 'O Parts
Posted: 12 Mar 2012, 16:24
by Govmnt_Lacky
skylark44 wrote:I'm still interested, FWIW.

Sorry for the late reply...
The only reason why the price is so low is because I am offering it as a package deal! If I split up the pieces, then it will probably be more than what you are expecting. Just want to be up front about that to you and anyone else interested. This really is a VERY LOW price for all of this gear. I just want it all gone.
I am open to
REASONABLE offers for the lot as well
If you are still interested in the 500K pots, then message me and I will work out a price.
Thanks

Re: Quality Pile 'O Parts
Posted: 12 Mar 2012, 19:38
by Govmnt_Lacky
Govmnt_Lacky wrote:skylark44 wrote:I'm still interested, FWIW.

Sorry for the late reply...
The only reason why the price is so low is because I am offering it as a package deal! If I split up the pieces, then it will probably be more than what you are expecting. Just want to be up front about that to you and anyone else interested. This really is a VERY LOW price for all of this gear. I just want it all gone.
I am open to
REASONABLE offers for the lot as well
If you are still interested in the 500K pots, then message me and I will work out a price.
Thanks

Willing to go as low as $125 shipped to the US.
And I will still throw in the Germ transistors
Won't get any better than that!!
Re: Quality Pile 'O Parts
Posted: 17 Mar 2012, 20:03
by Govmnt_Lacky
Make me an offer for the lot!
Re: Quality Pile 'O Parts
Posted: 20 Mar 2012, 11:26
by Govmnt_Lacky
Also willing to trade for a complete "paintable" wah shell kit + a little cash.
Re: Quality Pile 'O Parts
Posted: 26 Mar 2012, 12:00
by Govmnt_Lacky
Govmnt_Lacky wrote:Make me an offer for the lot!
Not even one reasonable offer for this?

Re: Quality Pile 'O Parts
Posted: 29 Mar 2012, 13:17
by Govmnt_Lacky
OK... Sweetin the deal!!
Throwing in the following:
Fully populated Tonepad Noise Gate board with mods, pots, jacks, 3PDT, and battery snap. All you need is an enclosure and DC jack!!
Fully populated Guitar Research Wah board with Inductor, on-board jacks, pot w/ spindle, Switchcraft stomp switch, and DC jack. All you need is the wah shell
This PLUS the above items for $125 + a little shipping.

Re: Quality Pile 'O Parts
Posted: 03 Apr 2012, 14:18
by Govmnt_Lacky
All of this for $125 + shipping!
No takers?

Re: Quality Pile 'O Parts
Posted: 14 Apr 2012, 23:52
by Govmnt_Lacky
Someone please let me know if I am asking TOO much for this stuff
Are these items just not that comon to us DIY'ers?
Re: Quality Pile 'O Parts
Posted: 15 Apr 2012, 11:56
by theehman
I'd be interested in the Vactrols, but that's about it.
Re: Quality Pile 'O Parts
Posted: 26 Apr 2012, 16:56
by Govmnt_Lacky
@Ron-
Thanks but I really want to get rid of all of this stuff as a group. It has been sitting here for a LONG time and I just want it gone.... but not get taken to the cleaners either. This is all worth at least 3X what I am asking.
NEWLY ADDED:
I am throwing in (5) of the Radio Shack 273-1380 transformers all in their original packaging. These are great for wah inductors and octave projects.
Looking for $125 shipped to the lower 48 for ALL of this stuff

Re: Quality Pile 'O Parts
Posted: 29 Apr 2012, 01:06
by Govmnt_Lacky
SOLD....
GONE...
ADIOS....
Finally
