Page 1 of 1
Aligning pins Eaglecad
Posted: 14 Mar 2012, 04:16
by chicago_mike
I have the Synthdiy.lib for the OTA's.
But the pins don't align to the grid.
The snap to grid ulp tool is not working, I keep getting access / permission denied.
HELP!
Re: Aligning pins Eaglecad
Posted: 14 Mar 2012, 16:31
by marshmellow
I've used that very library before myself, so I don't understand the problem really. It's a standard DIL16 package. If you use a grid proportional to the standard 0,1"/2,54mm, it will align the way it should. So my guess is, you set your grid to something else...
Re: Aligning pins Eaglecad
Posted: 14 Mar 2012, 16:38
by marshmellow
Ah well, you are talking about the schematic symbol... I tried that ULP you mentioned and it says to use it only in the schematic. Then I remembered that I modified the library when I used it first. Take a look at the attachment
.