ToadWorks Mr Squishy Compressor

IvIark · Post by **IvIark** » 29 May 2012, 00:32

Verified vero layout:

commondenominator · Post by **commondenominator** » 29 May 2012, 01:35

IvIark wrote:Verified vero layout:

Hi Mark I use you layout and make no change to sound. only change made with 1n34a that I read better for OS pedal work but sound not change for squishing knob. It compress and sound good but bass goes away very much. I read you site say C10K I no have so use A10K. I try 2.4k and 6.2k feeder I no tell hear no change compress and sustain always the same no change I try to explain my best so sorry.

IvIark · Post by **IvIark** » 29 May 2012, 10:41

I'm away from home for a few days and don't have access to all my files and am just posting from a Blackberry, but I'll have a look when I get back to try to help you fault find. The layout was verified by mirosol on my blog so we know it works, we just need to find what your problem is. In the meantime check it over for cold solder joints and unwanted bridges across tracks. Most of the time those two things are responsible for verified layouts not working.

A1full · Post by **A1full** » 05 Jun 2012, 01:48

please check your vero layout, although this does not work, any errors have.

IvIark · Post by **IvIark** » 05 Jun 2012, 01:54

Where? Someone has already verified this.

pedalgrinder · Post by **pedalgrinder** » 30 Aug 2012, 07:27

very nice layout would be cool to add a attack and release to this one

phibes · Post by **phibes** » 01 Sep 2012, 20:05

pedalgrinder wrote:very nice layout would be cool to add a attack and release to this one

http://moosapotamus.net/ideas/os-modifi ... -squeezer/

I still think the circuit sounds best stock but to each their own.

ToadWorks Mr Squishy Compressor [traced]