What is this?

Ok, you got your soldering iron and nothing is going to hold you back, but you have no clue where to start or what to build. There were others before you with the same questions... read them first.
Locked
User avatar
ipoo2
Information
Posts: 5
Joined: 16 Mar 2012, 10:43
Has thanked: 1 time

Post by ipoo2 »

Hey, is this a resistor? It has 1000h (or possibly m) printed on the side and reads 47.6k ohm. There is another on the board that has 150h/m and is rated at 325kohm.

From a Newbie, still learning whats what :wink:
component..JPG
component..JPG (36.99 KiB) Viewed 1158 times
Top
User avatar
kleuck
Cap Cooler
Information
Posts: 469
Joined: 15 Nov 2008, 23:24
Completed builds: I build and sell my own :)
Location: France
Has thanked: 42 times
Been thanked: 27 times

Post by kleuck »

1 nf Cap (1000pf)
Randall Aïken said :
Q: Is there any advantage to using solder with a 2% silver content?
A: Yes. Silver solder keeps werewolves away from your amp.
Top
Locked

Return to “Basic Knowledge”