Led lamps

yuuuuuuuuuuun · Post by **yuuuuuuuuuuun** » 27 Apr 2012, 23:55

does anyone know where to buy the led lamps like the ones fuzzhugger uses. they show only the lens from the outside, and inside the enclosure the resistor mounts inside the lamp. a red and black wire sticks out of the end.
thanks

bato001 · Post by **bato001** » 28 Apr 2012, 02:23

They look an awful lot like these.

http://www.radioshack.com/family/index. ... Id=2032297

yuuuuuuuuuuun · Post by **yuuuuuuuuuuun** » 28 Apr 2012, 03:37

yeah thats the ones, damn 2.19 each is too steep though. I looked everywhere but never thought of radio shack. thanks

phibes · Post by **phibes** » 28 Apr 2012, 03:48

They just look like the VCC lens to me which are real common now.

http://www.vcclite.com

yuuuuuuuuuuun · Post by **yuuuuuuuuuuun** » 28 Apr 2012, 05:32

those work with pcb mounted leds right? thats what the data sheet said. That wont work for me everything I build is vero or random pcbs I download from here or other sites. the vcc ones are just a lens and retainer. I've been just pushing the leds into a drilled hole and backing them with jb weld. but I saw those holders and thought I could make them nicer with holders.