freestompboxes.org

I am using the PPP 1590NS which is the same as the Hammond 1590BB.

Tonezone wrote:I am using the PPP 1590NS which is the same as the Hammond 1590BB.

Let me know if you have any problems with your build....

Hello Tonezone
Good luck with the build and post some pictures here when you have it up and running
Cheers
bajaman

Will do bajaman (Steve)!!! I have ordered your PCB. Ordered the 1590NS box. Ordered the pots, jacks, 9 pin base, 12Ax7 tube and footswitch....just making a list of all the rest of the needed diodes, resistors and other goodies! Thanks for all the help! I will post some pics as things develope.

Alex

For anyone state side or in other words the USA....I have made up a complete parts list....all the diodes, capacitors, pots...everything,,,,for the in experienced....like me!

Tonezone wrote:Will do bajaman (Steve)!!! I have ordered your PCB. Ordered the 1590NS box. Ordered the pots, jacks, 9 pin base, 12Ax7 tube and footswitch....just making a list of all the rest of the needed diodes, resistors and other goodies! Thanks for all the help! I will post some pics as things develope.

Alex

You can also use 12AT7,and 12AU7 tubes in this pedal too,they give different overdrive characteristics,these tubes have the same pinout as the 12AX7,so they are drop-in compatible....

Very well, understand! Waiting on parts!

I've just completed an order for a set of PCBs for Bajaman's Real Tube Overdrive,I'm looking forward to working on this,managed to score myself a PCB mount 9-pin valve socket from a defunct Trace Elliot Tramp Amplifier,so I will be using it for this build,I'll try and build it into a Soanar Diecast Aluminium enclosure,I'm also going to be sensible and use easily obtained off-the-shelf components,rather than any so-called "mojo" parts....

Anyone know of a online source for a 230V/16V power supply (preferably located in Europe)?

Just a reminder - my PCB sets are designed for a tight fit inside of a NSC 1590 enclosure
other enclosures may not work correctly.

suregork - Thomann sell the Seymour Duncan spare part power supply:
http://www.thomann.de/gb/seymour_duncan ... ly_16v.htm

I have 2 of these for sale, brand new and unused. €20 each or €35 for both including shipping to Europe if anyone's interested. I'm in the UK so they have the wrong plugs for me.

bajaman wrote:Just a reminder - my PCB sets are designed for a tight fit inside of a NSC 1590 enclosure
other enclosures may not work correctly.

Thanks for the reminder mate,the case I'm planning on using as an enclosure for this,has outside dimensions of 119mm x94mm x34mm....

Allowing for the thickness of the material ( 2mm diecast Aluminium),will I have any problems fitting the PCBs inside it,will I need to do any mods,and/or use a different case,Bajaman?...

Simon - i have said my piece
cheers
Steve

bajaman wrote:Simon - i have said my piece
cheers
Steve

No worries mate....

plesur wrote:suregork - Thomann sell the Seymour Duncan spare part power supply:
http://www.thomann.de/gb/seymour_duncan ... ly_16v.htm

I have 2 of these for sale, brand new and unused. €20 each or €35 for both including shipping to Europe if anyone's interested. I'm in the UK so they have the wrong plugs for me.

Both of these are now sold. Thanks.

I have started....I know that ceramic resistor is much too big, I will be removing for a smaller 1.5K 1/ 2watt resistor. It is a start!

tone zone - you can also lie the regulator flat too - the two holes are for the led connections on the solder side - I do not insert the wires through these holes
cheers
bajaman

Thank you bajaman!!!

Alex

keep those build pictures coming tonezone
cheers
bajaman