Page 1 of 1
Where to by those bigass ceramics?
Posted: 27 May 2012, 15:31
by sinner
Check it out
http://plexireplicas.com/amplifier-arch ... full-image
Metro guy uses those bigass cool ceramics, and I wish to know where to find them... I'm also after couple of plexi era Marshalls
Values needed are 50pf (47-56pf) 250pf (240-270pF) and 500pF (470-560pF)
![[smilie=grin.gif]](./images/smilies/grin.gif "grin")
Re: Where to by those bigass ceramics?
Posted: 27 May 2012, 18:53
by Govmnt_Lacky
sinner wrote:Check it out
http://plexireplicas.com/amplifier-arch ... full-image
Metro guy uses those bigass cool ceramics, and I wish to know where to find them... I'm also after couple of plexi era Marshalls
Values needed are 50pf (47-56pf) 250pf (240-270pF) and 500pF (470-560pF)
Are you talking about the ceramic attached to the pot?
Re: Where to by those bigass ceramics?
Posted: 28 May 2012, 05:57
by sinner
Yeah. Volume pot, tonestack cap, bright channel mix cap, and phase inverter cap
Re: Where to by those bigass ceramics?
Posted: 28 May 2012, 08:01
by Mugshot
hey man, is this a spot the cap contest? i thought there was only one, then you said there were other caps
Re: Where to by those bigass ceramics?
Posted: 28 May 2012, 08:17
by lolbou
Do they need to be high voltage ones?
Re: Where to by those bigass ceramics?
Posted: 28 May 2012, 09:40
by sinner
for mixer yeah, 500v minimum, the rest will do with 250
Re: Where to by those bigass ceramics?
Posted: 28 May 2012, 14:11
by Duckman
Looks like some Murata caps I've scavenged from old TV sets and radios.
I don't know if they are still in production
http://www.murata.com/products/capacitor/
Got the values, but not the same look.
Re: Where to by those bigass ceramics?
Posted: 29 May 2012, 01:43
by diagrammatiks
you can look for a 1kv rated c0g are k7r. that will come in the size you need.
I know sprague made a bunch of ceramic caps like that. I got a whole bunch in an estate sale at one point.
