TC Electronics - Stereo Chorus Flanger [pcb+layout]

Post by **GodSaveMetal** » 24 Jun 2013, 03:58

iznogoud wrote:No problem if you find the right values before I have time to do it.
Do not hesitate to put corrections/revisions : as I said : just bought an old SCF a few days ago, but I'm actually too overbooked to work or focus on it

Ohhhh!!! great!!!!!!!!!!!!!!!! that solutions many many, unknows I have too!! take your time, I´M doing the base PCB!!!! it´s great!!!!!!!! I love the FLANGER and CHORUS!!! I have made some of them, The MISTRESS flanger with MN3007; the CHORUS with PT2399, and goin to make a flanger with the PT2399, cuze this IC is so popular in PERÚ it´s easy to obtain, also the MN3007!!! it´s very very common !!!!!!

I´m tuned awating that photos, all you can do man take your time, please details details ehhh!!! THANKS man!!!!!!!!!!!

iznogoud · Post by **iznogoud** » 24 Jun 2013, 07:04

You will love the TC if you build it : for most of those who tried/used it, it's the best chorus on Earth : doesn't degrade the dry signal, no hum, no noise, very precise, warm, 100dB dynamics. If you like Andy Summers, Eric Johnson or John Petrucci choruses, that's the shit.

The MISTRESS flanger with MN3007

bought a out of use last year for 30€... but no MN3007 on board : it's an older one than your schematic w SAD1024, I love it!

the CHORUS with PT2399, and goin to make a flanger with the PT2399, cuze this IC is so popular in PERÚ

I don't think I'll ever build any digital effect considering stuff I got. I think I'll make ppl mad if I list my equipment

Stephanovitch · Post by **Stephanovitch** » 24 Jun 2013, 17:11

Pictures gallery will help you:

http://pics.studiorepair.com/TC_Electro ... 61353.html

Post by **GodSaveMetal** » 25 Jun 2013, 04:16

Stephanovitch wrote:Pictures gallery will help you:

http://pics.studiorepair.com/TC_Electro ... 61353.html

THANKS, MAN IT IS A GOOD BEGINING, BUT I MUST HAVE MORE DETAILS OF THE UPPER CARD, THERE ARE SOME VALUES AND RESISTOR I DON´T SEE IN THE FIRT POST, BUT IS A BEST BEGINING!!! THANK TO MEET A GOOD FRIENDS THAT ARE TUNED AND HELP!!! VERY THANKS MAN!!!!

excuse for my capital letters, the upper button it´s aptive!!!! excuse me!!!!!!! THANK!!!!!!!!

Stephanovitch · Post by **Stephanovitch** » 25 Jun 2013, 05:09

I can help you to identify components on upper board.
I use sprint layout 5.0, I d'ont know if I can open 6.0 files (I search a 6.0 version)
Trace in red the components with unknow values on a SL view
I have a scan to draw responses.

iznogoud · Post by **iznogoud** » 25 Jun 2013, 07:46

The guts pics are nicer thant what my shit cam can do! Well done watson!!!!

Fender3D · Post by **Fender3D** » 25 Jun 2013, 10:41

Stephanovitch wrote:Pictures gallery will help you:

http://pics.studiorepair.com/TC_Electro ... 61353.html

Please Stephanovitch,
if you can take some measurements, add clock frequencies. Please read here viewtopic.php?f=28&t=22623

Stephanovitch · Post by **Stephanovitch** » 25 Jun 2013, 17:32

Please Stephanovitch,
if you can take some measurements, add clock frequencies. Please read here viewtopic.php?f=28&t=22623[/quote]

Sorry Fender3D but I have not original stompbox.
I have drawn schematics with webs plans and works of Iznogoud

iznogoud · Post by **iznogoud** » 26 Jun 2013, 09:57

BTW, I noted how the trimmers were put on my work

IKt's not a precise thing but I think it can help a little for calibrating

Post by **GodSaveMetal** » 28 Jun 2013, 15:33

Well here is the base layout:

Post by **GodSaveMetal** » 28 Jun 2013, 15:36

And last the PCB for that:

Post by **GodSaveMetal** » 28 Jun 2013, 15:42

The BASE LAY are from the picture galleries that Stephanovitch put on his message, some values are diferents from the version 2, but some resistors are lost on the version 2 in the controls lay; I´m waiting the photos of the original ones or a mesage to do a corrections, thanks of all of you, it is a pleasure to do this lays!!!!!!!!!!!!
If I can continued helping; I´m tuned if you have more photos!!!!!!!! the upper layout please!!!!! it is not on the picture gallery or are not clear enougth!!!!!

Stephanovitch · Post by **Stephanovitch** » 28 Jun 2013, 19:41

Wonderful work!
can you poste sprint layout files?

Post by **GodSaveMetal** » 29 Jun 2013, 02:03

Stephanovitch wrote:Wonderful work!
can you poste sprint layout files?

Well I don´t nkow how to make it but you have sprint 6????

Post by **GodSaveMetal** » 29 Jun 2013, 02:17

I will do the modified, you can mention to me what is wrong!
1º problem I don´t know the value of this resistor, is under RED circle+RED arrow?? can somebody take a look to the original one´s??? THANKS a lot, to modified the upper PCB, and post it!!!!

Post by **GodSaveMetal** » 29 Jun 2013, 02:37

I post some values that I will see in the photos, in the PCB layout by iznogoud, his version2, he don´t see the value of a condenser; it´s corrected, and I see a diferent value of a resistor in the photo; there is a 51K resistor; and the position of one that is unknow his value, the rest; well other eye can help please?????
THANKS !!!!!!!!!!!!!!!

Post by **GodSaveMetal** » 29 Jun 2013, 02:45

Post the corrected upper PCB:

Post by **GodSaveMetal** » 29 Jun 2013, 02:54

Post the corrected BOTTON PCB lay; any corrections or problem you see please let me KNOW!! to make the best pedal!!!!!:

Stephanovitch · Post by **Stephanovitch** » 29 Jun 2013, 14:24

GodSaveMetal wrote:Post the corrected upper PCB:

The value of the unknow resistor next to BC548B is 4k7 (see R129 on part 4 of my previous posted schematic)

The value of the resistor at right of the "speed" pot is not 4M7 but 4k7 (see R128 on part 4 of my previous posted schematic)

Post by **GodSaveMetal** » 29 Jun 2013, 15:02

Stephanovitch wrote:
GodSaveMetal wrote:Post the corrected upper PCB:
The value of the unknow resistor next to BC548B is 4k7 (see R129 on part 4 of my previous posted schematic)

The value of the resistor at right of the "speed" pot is not 4M7 but 4k7 (see R128 on part 4 of my previous posted schematic)

Thanks, thas the problem of the photo f the upper circuit, some values are no clear, yea I suposed that the unknow ressitor is 4K7, ummm the rigth ones at the speed, o yeah I see it, well posting the wrigt value yet:

TC Electronics - Stereo Chorus Flanger [pcb+layout] [schematic]