freestompboxes.org

Hi guys

This is gonna be my forth build as I always seem to hit problems I am gonna keep a updated thread with photos..

Please jump in with suggestions or point me in the right direction if you see some thing wrong..

This is the layout I am using

http://2.bp.blogspot.com/-R70ESJvzacU/T ... r+Ruby.png

Links and Cuts made.....

https://s1060.photobucket.com/albums/t4 ... y%20Build/

I cut the Vero with a craft Knife 13 across 7 down

I first marked out the cuts and did these with a 3mm Drill bit

Then soldered the links at 7 down 5 across and 7 down 9 across

The 1 meg Resistors are in

https://s1060.photobucket.com/albums/t4 ... rs1005.jpg

And the 2m2 Resistors

https://s1060.photobucket.com/albums/t4 ... rs1006.jpg