Dunlop - JH-OC1 Jimi Hendrix Octavio

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
Post Reply
User avatar
hittive
Information
Posts: 1
Joined: 30 Oct 2011, 19:44

Post by hittive »

Hi,
I want to build Dunlop JH-OC1 Jimi Hendrix Octavio . I want to get PCB from tonepad (Tychobrahe Octavia) and use this schematic: https://i195.photobucket.com/albums/z21 ... st-3-1.jpg . Does it work?
Attachments
Dunlop - JH-OC1 Jimi Hendrix Octavio schematic
Dunlop - JH-OC1 Jimi Hendrix Octavio schematic
Top
User avatar
Axeman.Bodie
Information
Posts: 4
Joined: 11 Jul 2016, 00:10
Has thanked: 1 time
Been thanked: 1 time

Post by Axeman.Bodie »

I'm not sure if they will work together. To my knowledge the Dunlop Octavio uses an audio transformer, and the Tychobrahe Octavia does not drive the signal with the same type part. So it is possible they will not work together due to the board not having the right holes for the part. But I could be wrong..
Top
Post Reply

Return to “Modern Stompbox Effects (1975 - ...)”