Dean Markley CD 60 Original Amp Switching Schematic.

Tube or solid-state, this section goes to eleven!
Post Reply
User avatar
gurishka
Breadboard Brother
Information
Posts: 86
Joined: 22 Oct 2008, 02:34
Location: Victoria, Australia
Has thanked: 23 times
Been thanked: 1 time

Post by gurishka »

Hi guys and gals,

This may be a long shot, but I'm trying to acquire a schematic for the CD 60 as the amp I've got doesn't have the included 3 button footswitch and the connector is a random plug.

I may inadvertently have to pull the pcb out and trace the thing but I would rather have a schematic to follow for safety sake.

Any help would be appreciated.

User avatar
gurishka
Breadboard Brother
Information
Posts: 86
Joined: 22 Oct 2008, 02:34
Location: Victoria, Australia
Has thanked: 23 times
Been thanked: 1 time

Post by gurishka »

Nevermind guys...all good...just going to leave it be.

User avatar
mozwell
Breadboard Brother
Information
Posts: 112
Joined: 11 Mar 2009, 23:01
my favorite amplifier: home made SVT2
Completed builds: baja tube driver, several TS variants, Sansamp GT2, Ross Comp
Location: Melbourne, Australia
Has thanked: 22 times
Been thanked: 66 times

Post by mozwell »

not sure if you are still interested, maybe some of these will help
footswitch shoudl be either stereo or mono, short tip / ring to mains "body" to switch overdrive / reverb.....
if not, they are here for posterity
Attachments
dean markley D1502 pwr.pdf
(266.2 KiB) Downloaded 251 times
dean markley D1501 pre.pdf
(277.42 KiB) Downloaded 246 times

Post Reply