Implementing an expression pedal hook-up
Posted: 29 Oct 2012, 09:06
I'm building an Anderton Super Tone Control on veroboard from the genious lVlark's blog http://tagboardeffects.blogspot.fr/2012 ... ntrol.html
Do you know how I could implement an input so I could control the filter frequency with an EP2 pedal from Moog ?
Here what the Moogerfooger's manual tells about the pedal inputs.
'All pedal control input jacks are 1/4" tip-ring-sleeve phone jacks. The sleeves are grounded and the ring terminals are supplied with +5.7 volts which is current-limited to about 0.5 milliamperes. The tip terminals receive the variable voltages from the pedals.'
And here is a pdf that show the details about the pedal itself.
http://www.teaser.fr/~amajorel/ep2/
Thank you in advance. And sorry for my ignorance.
Do you know how I could implement an input so I could control the filter frequency with an EP2 pedal from Moog ?
Here what the Moogerfooger's manual tells about the pedal inputs.
'All pedal control input jacks are 1/4" tip-ring-sleeve phone jacks. The sleeves are grounded and the ring terminals are supplied with +5.7 volts which is current-limited to about 0.5 milliamperes. The tip terminals receive the variable voltages from the pedals.'
And here is a pdf that show the details about the pedal itself.
http://www.teaser.fr/~amajorel/ep2/
Thank you in advance. And sorry for my ignorance.