T.C. JAUERNIG - Gristle King

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
elminster
Information
Posts: 5
Joined: 08 Sep 2011, 08:08
Been thanked: 5 times

Post by elminster »

here are some gutshots of the TC Jauernig Gristle King. It seems a bit different to the TRex version. Can anyone help with a schematic? Unfortunately i dont have access to the underside of the board....
Attachments
gristlekingboard.jpg

User avatar
elminster
Information
Posts: 5
Joined: 08 Sep 2011, 08:08
Been thanked: 5 times

Post by elminster »

Pretty obvious but the diodes on the right are 1N4001 and 1n34a....

User avatar
elminster
Information
Posts: 5
Joined: 08 Sep 2011, 08:08
Been thanked: 5 times

Post by elminster »

apparently the gristle king is supposed to be the dgtm and the luxury drive. but looking at this dgtm board the clipping options seem similar but the dgtm has typical TS style input and out put buffer transistors, these are missing in the gristle king....
Attachments
DGTM3.jpg

User avatar
fxboy
Information
Posts: 1
Joined: 14 Apr 2013, 01:31

Post by fxboy »

The DGTM and V3 of the GK differ greatly. There have been 3 versions of the GK over 9 years. V1 was a DGTM and a Lux Drv. V2 was a DGTM and a FET boost. V3 is the FET boost from V2, but a different OD section.

As far as T-Rex, that one was based on V1. Long story on that deal and why I ended it.

User avatar
bigorangefan79
Breadboard Brother
Information
Posts: 68
Joined: 27 Jun 2010, 05:06
Has thanked: 1 time
Been thanked: 28 times

Post by bigorangefan79 »

Tim?.....
Sup bruh? :thumbsup

Post Reply