2-in-1 w/ buffered bypass
Posted: 25 Feb 2013, 05:48
Ok, so for my next build I wanted to do a take a jab at 2 boosts in a single enclosure. I wanted to put the 'simplified Klon' with the red rooster able to switch independently.
Now I've seen diagrams for wiring like this with true bypass, but I'm at a bit of a loss because of the Klon's buffered wiring and such. Now I realize for starters, that I believe a wire should run from input to a middle lug on the switch, but other than that I have no idea how I would go about wiring these effects together in a box. I went through all the active threads, and some are about 2-in-1 enclosures, but have the true bypass switching. Also I'm not sure if the Red Rooster would be wired as true bypass, or if it would matter because the Klon would be buffered? Sorry for the long winded post. I attached the two files for the circuits in question. Any help would be appreciated!
- RedRooster.png (39.76 KiB) Viewed 1063 times