Squarewave Parade - Downgrade (sample rate reducer)

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
Beedoola
Resistor Ronker
Information
Posts: 378
Joined: 01 Feb 2008, 22:52
Location: Bay Area, CA
Has thanked: 15 times
Been thanked: 32 times

Post by Beedoola »

Anyone have any info on it? Its apparently based on the Bug Crusher:

http://getlofi.com/the-downgrade-analog ... e-reducer/

Image
Image

User avatar
commathe
Breadboard Brother
Information
Posts: 97
Joined: 01 Jul 2013, 22:31
Has thanked: 5 times
Been thanked: 7 times

Post by commathe »

Without sound samples it is tough to tell. I see what seems to be an op-amp and some leds and diodes. I am guessing it's a simple overdrive circuit either before or after the s&h and maybe a switch between the diodes but without sound samples it's tough to tell what the other mods are.

User avatar
Beedoola
Resistor Ronker
Information
Posts: 378
Joined: 01 Feb 2008, 22:52
Location: Bay Area, CA
Has thanked: 15 times
Been thanked: 32 times

Post by Beedoola »

commathe wrote:Without sound samples it is tough to tell. I see what seems to be an op-amp and some leds and diodes. I am guessing it's a simple overdrive circuit either before or after the s&h and maybe a switch between the diodes but without sound samples it's tough to tell what the other mods are.
http://thesquarewaveparade.com/samples/ ... audrey.mp3

User avatar
joe_pineapple
Breadboard Brother
Information
Posts: 74
Joined: 07 Sep 2009, 22:31
my favorite amplifier: eden highwayman
Completed builds: woolish mammoth, a variety of germanium and silicon fuzz factories, machine, parallel universe, random # generator, dirty sanchez, swamp thang, SHO, DLS, peach fuzz, cream puff, prunes and custard, red llamalike,
Location: san francisco
Has thanked: 105 times
Been thanked: 2 times
Contact:

Post by joe_pineapple »


great use of Audrey the text-to-voice robot. and it very much sounds like some bugs are being crushed.
"..the finished product is just the garbage left over from the work." R.G. Keen

Post Reply