Skreddy Zero Schematic?

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
CloneME
Information
Posts: 16
Joined: 08 Jan 2008, 01:38
Has thanked: 1 time

Post by CloneME »

Is there one out there? I know it's just a Big Muff but I'm wondering what he did to tighten it up.
Top
User avatar
Skreddy
Resistor Ronker
Information
Posts: 419
Joined: 11 Nov 2007, 04:22
Has thanked: 12 times
Been thanked: 228 times
Contact:
Contact Skreddy

Post by Skreddy »

The NOS 2N5088 transistors I used have a very aggressive, straight-ahead nature. No tightening was necessary. Very much classic Big Muff values, the most common ones you'll find. All ceramic disc caps except input and the coupler between stages 2 and 3 are .1 poly.
Top
User avatar
CloneME
Information
Posts: 16
Joined: 08 Jan 2008, 01:38
Has thanked: 1 time

Post by CloneME »

Really!!! :shock: I had a Zero, Mayo and ? Lady at the same time along with other Muff's and the Zero sounded so different. I can't believe it was just the trannies! I was hoping it was just a difference in the tone stack or something I could mod my Muff to get close. Guess not!
Top
Post Reply

Return to “Boutique Stompboxes dissected...”