freestompboxes.org

i had one but the price was high for such a small simple circuit. very mesy perf build. i have pics but I couldn't trace it. sanded tranny's
Would Like a vero layout or even a schematic if anybody has time or has one.


Thanks for anyone's help

you'll need to post the pictures if you want someone to try and trace it. i think you need to have 5 posts under your belt before the board allows you to upload pics, just write a couple of nonsense replies here then start a new thread in the boutique section with the pedal name as the title and upload the pics there.

Had a lot more posts years ago. I don't know what happened.

oh well it doesn't really matter

I scoured the internet for info on this and found nothing. I also posted about this pedal in the requests section.
looks to be so simple but i can't figure out the mess that it is. Sounds freaking huge though.
Would it be a 1 knob fuzz with a LED added?

Thanks in advance.

What are the transistor, pot and cap values?

WOW $150.00 for this bayby?? There must be gold somewhere

Put the two transistors with some resistors and caps in box - connect randomly and you will get similiar sound

Sorry should put this in first post.

Transistors were sanded.
Electrolitics were 100 uf and 10 uf
caps are a .01, .0047, and .22
I forgot to see what the pot value was.

The pot is 100K log

pfindeis wrote:Sorry should put this in first post.

Transistors were sanded.
Electrolitics were 100 uf and 10 uf
caps are a .01, .0047, and .22
I forgot to see what the pot value was.

Gracias. Pot is actually show in one of the pics, I just missed it. Can you post a close up of that mess of resistors on top and a shot of the bottom with as many wires out of the way as possible and no flash? First stage is pretty much a Bazz Fuss with an LED, but I can't see a few things going on after that.
.

all i have are here. Not sure if they will help.
https://s43.photobucket.com/user/vtwin1 ... t=3&page=1

Thanks