Laser / Bros / Sonora / Sound City - Overdrive

Bernardduur · Post by **Bernardduur** » 13 Jul 2015, 05:54

My best guess is that it is a Boss OD-1 clone with some added mods. It is very bright and LOUD (guess the taper of the volume pot

)

Pictures from Discofreq's database
(when some more pics are needed, please ask!!)

Enjoy!

apollomusicservice · Post by **apollomusicservice** » 13 Jul 2015, 06:54

Check Q5 orientation.

Bernardduur · Post by **Bernardduur** » 13 Jul 2015, 09:42

apollomusicservice wrote:Check Q5 orientation.

I did; it is set in this pedal like this. And it works.........

(B and E should be reversed, I guess)

Dirk_Hendrik · Post by **Dirk_Hendrik** » 13 Jul 2015, 12:15

Then check it again. And keep checking till you figure out why your drawing is wrong.

Bernardduur · Post by **Bernardduur** » 13 Jul 2015, 19:19

Of course you're right!

Problem was the notation on the print; on the top side there are markings for the B / C / E that are completely wrong. I didn't check those with the datasheet

Beginners fault

Laser / Bros / Sonora / Sound City - Overdrive [schematic]