Reagun - Stereo Chorus

hozy31 · Post by **hozy31** » 12 Apr 2016, 18:55

I have some good gut shots of this chorus if anyone is interested with all components listed. However, I'm not sure how to post the images. Sorry, been watching this site for years and thought i would add my bit. Did post gutshots on Guitar FX layouts forum but no joy.
I have the components necessary to build and do my own PCBs so if anyone fancies doing a schematic/pcb trace once i have figured out how to upload pictures that would be cool.

hozy31 · Post by **hozy31** » 13 Apr 2016, 07:29

Ok so i uploaded photos to photobucket which i hope will work. Here are the links.
https://i1084.photobucket.com/albums/j4 ... zfdgsv.jpg
https://i1084.photobucket.com/albums/j4 ... a8a3zt.jpg
And description of the wires from Guitar FX layouts.
The green wire goes to the input jack and the yellow and white go to the two outputs. The red wire at the bottom goes to +9v. There don't seem to be any ground wires connected to these.
The pink wire goes to lug 1, the yellow to lug 2 and green to lug 3 of a B100k which is the depth pot. The white wire goes to lug 2 and the blue wire to lug 3 of a C1M which is the speed pot (lug 1 unconnected).
The strange thick grey wire goes to the footswitch with another wire from the same cable also contacting the input jack
Realised i have missed a resistor value. Bottom right resistor next to the .022 cap is 4k7.

hozy31 · Post by **hozy31** » 14 Apr 2016, 07:22

Ignore that picture of the rotary switch that was from another build. In fact i can't remember what thats from.

hozy31 · Post by **hozy31** » 14 Apr 2016, 15:52

Figured out what that rotary looking type switch was its actually the three way selector of one of my guitars. I took photos as i have never been able to find out what make it is, even though its got a number on its back plate.

hozy31 · Post by **hozy31** » 14 Apr 2016, 16:05

Sorry five way selector switch to be precise.