Ibanez Standard Wau Fuzz, help with wiring, please

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
jamie_flamewar
Information
Posts: 1
Joined: 17 Aug 2016, 10:08

Post by jamie_flamewar »

Hi!

I recently bought Ibanez Standard Wau Fuzz -pedal, it has some loose wires that are not connected on the PCB. And at the moment I only have the wah side working. There is now sound when I switch to fuzz. I wonder if someone who owns this pedal or similar one, could take a picture showing how to do the wiring. A picture showing the whole pedal guts and a picture of the underside of the PCB would be a great help! I've found some picture from internet, but none of those show clearly which wire goes to where.

Thank you!
Top
User avatar
GorillaHuman
Information
Posts: 44
Joined: 10 Nov 2011, 17:57
Has thanked: 7 times
Been thanked: 4 times

Post by GorillaHuman »

I think I have one laying around somewhere. Still interesed?
Top
Post Reply

Return to “Pedal Debugging & Troubleshooting Support”